User's Guide

51. Select Module and Facility.
52. Select Severity level. emerg is the highest level while debug is the lowest
level.
53. Select Location: Remote Server or Mail.
54. The succeeding fields may vary depending on the selected location. Enter the
necessary information accordingly.
55. Click the Apply button to save your changes or click the Cancel button to
discard your changes.
E-mail Log Periodically
To log e-mails periodically, do the following:
56. Check the SMTP Server box to enable logging of e-mails periodically.
57. Enter the SMTP Server IP, Source E-mail Address, and Destination E-mail
Address.
58. If SMTP Authentication is enabled, enter the SMTP Username and SMTP
Password. Re-enter the password in the Confirm Password field.
59. Select the Frequency of logging e-mails.