Datasheet

N300 Wireless 12dBi Outdoor 5GHz PoE Access Point
TEW-676APBO (v1.0R)
SPECIFICATIONS
HARDWARE
Standards Wired: IEEE 802.3u (100Base-TX)
Wireless: IEEE 802.11a/n (5 GHz)
LED Indicator Power, LAN, WLAN (wireless activity)
Antenna 12dBi patch antenna (polarization: V30°, H30°)
PoE 1 x 10/100Mbps RJ-45 PoE port, Passive only (non-802.3af compliant)
Dimension (L x W x H) 215 x 122 x 66 mm ( 8.5 x 4.8 x 2.6 in)
Weight 1kg (2.2lbs)
Power Consumption 15 Watts (max.)
Management Web browser (HTTP/HTTPS), SNMP (v2c and 3), Telnet, SSH
Wind Speed Support 210 km/hr
Waterproof IP66/67 compliant
Temperature Operating: -20° ~ 60°C (-4°F ~ 140°F)
Storage: 0° ~ 60°C (32°F ~ 140°F)
Humidity Max. 95% (non-condensing)
Power PoE power injector DC output: 48VDC, 0.4A
Certifi cations FCC
WIRELESS
Frequency 5.725 ~ 5.845 GHz
Modes Router, Access Point + WDS, WDS, CPE, Client Bridge + Repeater, CPE + Access Point
Virtual Access Points 7
Associated Clients (max) 224 (AP Mode), 32 (Repeater Mode)
*Coverage 7km line-of-sight
Modulation Technique 802.11a: OFDM with BPSK, QPSK, QAM and 64QAM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Data Rate (auto-fallback) 802.11a: up to 54Mbps
802.11a/n: up to 300Mbps
Security 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS for AP/CPE mode, WEP/WPA2-PSK for WDS mode
MAC fi lter (20 entries) and IP fi lter (20 entries)
Output Power Up to 27dBm (FCC)
Receiving Sensitivity 802.11a: -91dBm (typical) @ 6Mpbs
802.11a/n: -68dBm (typical) @ 300Mbps
Channels FCC: 149,153,157,161,165
* Effective wireless coverage may vary depending on the wireless device’s output power, antenna gain, antenna alignment, receiving sensitivity, and radio
interference. For optimal results, we recommended that you consult a professional installer for site survey, safety precautions, and proper installation.
TEW-676APBO
rev: 03.29.2012