User guide

TRENDnet User’s Guide

TEW-804UB

Connect to your wireless network

1. Open up the wireless utility.

2. Click on the Available Networks tab.

3. In the list, double click on your wireless network or select your wireless network and

click the Connect button.

4. If your network has security enabled, you will be prompted to enter the Network Key

and the encryption type will be detected automatically. Enter the Network Key and click

OK.

Note: After entering the network key, you can click Display Key to show the characters

you typed in for the network key to verify it is correct.

4. The wireless network information will appear at the bottom of the utility of the

wireless network you are connected and the Signal Strength/Link Quality bars will turn

green to indicate a successful connection.

Connection Successful

Connection Unsuccessful

Note: If there is no information displayed and the bars do not turn green, you were not

connected to the wireless network successfully. Please select your network in the list

again, and click Modify and re-enter your Wi-Fi/Network Security Key to verify if your

key may have been entered incorrectly, then click OK. If you are still experiencing issues

connecting to your wireless network, you may need to verify the security settings of your

wireless network to make sure they correct key is entered.