User guide

TRENDnet User’s Guide

TEW-804UB

Connect to your wireless network

1. Open up the wireless utility.

2. Click on the Available Network tab.

3. In the list, double click on your wireless network or select your wireless network and

click the Connect button.

4. If your network has security enabled, you will be prompted to enter the Network key

and the encryption type will be detected automatically. Enter the Network key, enter

the key again under Confirm network key and click OK.

Note: After entering the network key, you can click Display Key to show the characters

you typed in for the network key to verify it is correct.

4. The wireless network information will be displayed on the Link Status window of the

utility for the wireless network you are connected and the Signal Strength/Link Quality

bars will turn blue to indicate a successful connection.

Connection Successful

Note: If there is no information displayed and the bars do not turn green, you were not

connected to the wireless network successfully. Please double click your network in the

list again, and re-enter your Wi-Fi/Network Security Key to verify if your key may have

been entered incorrectly, then click OK. If you are still experiencing issues connecting to

your wireless network, you may need to verify the security settings of your wireless

network to make sure they correct key is entered.