User guide

TRENDnet User’s Guide

TEW-804UB

PIN (Personal Identification Number) Method

1. Open up the wireless utility.

2. Click on the WPS tab.

3. The client PIN Code will be generated automatically.

4. On your wireless router/access point, enter the client PIN Code into your wireless

router/access point configuration page and start the WPS process.

Note: You will need to access the device configuration page (typically through a web

browser) to access the WPS section to enter the client PIN code and use the WPS PIN

method. You may need to refer to your device documentation on how to access your

device’s configuration page and locate the WPS section. The example below (from our

TRENDnet TEW-811DRU router) shows where the WPS client PIN information is entered.

5. In the WPS window on the wireless utility, click PIN.

6. Messages will appear utility indicating that the WPS process has been activated and

the status. Wait for the process to complete.

Note: If needed, you can click Cancel to cancel the WPS process.

7. If successful, you will see the following message. Click OK.

Note: The wireless network will be added to your Profiles list automatically.

Note: You can check the Link Status window to check the connection status and

information about the wireless network you are connected.