User's Guide

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-818DRU
34
Note: You can apply a predefined schedule to the following features:
• Virtual Server
• Access Control (Domain/URL Filters & IP/Protocol LAN Client Filters)
• Special Applications
• Gaming
1. Log into your router management page (see “
Access your router management page”
on page 17).
2. Click on the Advanced tab.
3. Click on Administrator section and click Schedule.
3. Review the Schedule settings. Click Apply to save settings.
• Rule Name: Enter a name for the schedule you would like to apply.
• Days: Check the days you would like the rule to be applied or select All Week to
enable the rule all week.
• Start/End Time: Select the start and end time you would like the schedule to follow.
Note: The schedule defined will define the time/day the feature will be activated.
Access Control
Advanced > Security > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “
Access your router management page”
on page 17).
2. Click on the Advanced tab.
3. Click on the Security section and click on Access Control.
3. Under Access Control, click the LAN Client Filter Function drop-down list and select
Enabled to activate the feature.
4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.
• LAN IP Address Range: Enter the IP address or IP address range to apply the
protocol (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30).