User's Guide
Table Of Contents
- Table of Contents
- Product Overview
- Router Setup
- Wireless Networking and Security
- Basic
- ADvanced
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Manually configure your Internet connection
- Clone a MAC address
- Add static routes to your router
- IPv6 Internet Connection Settings
- Prioritize traffic using QoS (Quality of Service)
- Advanced wireless settings
- Set your router date and time
- Create schedules
- Access Control
- Open a device on your network to the Internet
- Enable/disable Application Layer Gateways (ALG)
- Enable/disable UPnP on your router
- Using External USB Storage
- Print Share Utility Installation
- Router Maintenance & Monitoring
- Change your router login password
- Change your device name
- Change your device URL
- Identify your network on the Internet
- Allow remote access to your router management page
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Upgrade your router firmware
- Reboot your router
- Allow/deny ping requests to your router from the Internet
- Check the router system information
- Router Management Page Structure
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-818DRU
5
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Whole home wireless coverage for average size homes
Backward Compatible
Compatible with legacy wireless devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to 50%
Targeted Beamforming
Increased real-time performance by directing stronger wireless to your specific
location
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. 802.11n 2.4 GHz
TurboQAM speeds requires clients with TurboQAM support.
** Printer Control Center utility installation required for each computer in order to
access the printer
Product Hardware Features
Rear View
• USB 3.0 and USB 2.0 Share Port: Connect a USB storage device to share files across
your network or connect a USB printer to share printers across your network
(Printer Control Center utility required for printer sharing).
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
• Gigabit LAN Ports 1-4: Connect Ethernet cables (also called network cables) from
your router LAN ports to your wired network devices.
• Gigabit Internet Port: Connect an Ethernet cable from your router Internet port to
your modem.
Reset Button (Located on Bottom)
Gigabit LAN
Ports 1-4
Gigabit Internet
Port
USB 3.0 Share
Port
Power Port
WPS Button
On/Off Power Switch
(EU only)
USB 2.0 Share
Port