User's Guide
Table Of Contents
- Table of Contents
- Product Overview
- Router Setup
- Wireless Networking and Security
- Basic
- ADvanced
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Manually configure your Internet connection
- Clone a MAC address
- Add static routes to your router
- IPv6 Internet Connection Settings
- Prioritize traffic using QoS (Quality of Service)
- Advanced wireless settings
- Set your router date and time
- Create schedules
- Access Control
- Open a device on your network to the Internet
- Enable/disable Application Layer Gateways (ALG)
- Enable/disable UPnP on your router
- Using External USB Storage
- Print Share Utility Installation
- Router Maintenance & Monitoring
- Change your router login password
- Change your device name
- Change your device URL
- Identify your network on the Internet
- Allow remote access to your router management page
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Upgrade your router firmware
- Reboot your router
- Allow/deny ping requests to your router from the Internet
- Check the router system information
- Router Management Page Structure
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-818DRU
56
Internet Configurations
• Connected Type: The WAN connection type applied on your router.
• IP Address: The current IP address assigned to your router WAN port or interface
configuration.
• Subnet Mask: The current subnet mask assigned to your router WAN port or
interface configuration.
• Default Gateway: The current gateway assigned to your router WAN port or
interface configuration.
• DNS (Domain Name System): The current DNS address(es) assigned to your router
port or interface configuration.
• Renew (DHCP WAN Type): Click this option to renew your WAN IP address.
• Release (DHCP WAN Type): Click this option to release the WAN IP address of your
router.
• Connect (PPPoE WAN Type): Click this option to connect to your DSL ISP
• Disconnect (PPPoE WAN Type): Click this option to disconnect from your DSL ISP.
LAN Information
• MAC Address: The current MAC address of your router’s wireless or interface
configuration.
• IP Address: Displays your router’s current IP address.
• Subnet Mask: Displays your router’s current subnet mask.
2.4GHz Wireless LAN
• MAC Address: The MAC address of your router’s wireless LAN or interface
configuration.
• Channel: Displays the current wireless channel your router is operating.
• Network Name (SSID)/ Security Mode: Displays the current wireless network name
assigned to your router and the wireless security applied to the SSID
5GHz Wireless LAN