User's Guide
Table Of Contents
- Table of Contents
- Product Overview
- Router Setup
- Wireless Networking and Security
- Basic
- ADvanced
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Manually configure your Internet connection
- Clone a MAC address
- Add static routes to your router
- IPv6 Internet Connection Settings
- Prioritize traffic using QoS (Quality of Service)
- Advanced wireless settings
- Set your router date and time
- Create schedules
- Access Control
- Open a device on your network to the Internet
- Enable/disable Application Layer Gateways (ALG)
- Enable/disable UPnP on your router
- Using External USB Storage
- Print Share Utility Installation
- Router Maintenance & Monitoring
- Change your router login password
- Change your device name
- Change your device URL
- Identify your network on the Internet
- Allow remote access to your router management page
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Upgrade your router firmware
- Reboot your router
- Allow/deny ping requests to your router from the Internet
- Check the router system information
- Router Management Page Structure
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-818DRU
6
• On/Off Power Switch: Push the router On/Off power switch to turn your router
“On” (Inner position) or “Off” (Outer position). Available on EU version product
only.
• Power Port: Connect the included power adapter from your router power port and
to an available power outlet.
• Reset Button (Located on Bottom): Press and hold this button for 10 seconds to
reset the router.
Front View
USB 3.0 and USB 2.0 LED: The indicator turns green indicating a USB device is
connected and turns off when there is no USB device connected.
5GHz Wireless (Link/Activity) LED: The indicator turns on solid green when 5GHz
wireless is enabled on your router. The indicator will blink during when data is
transmitted or received by your 5GHz wireless client devices connected to your
router.
2.4GHz Wireless (Link/Activity) LED: The indicator turns on solid green when
2.4GHz wireless is enabled on your router. The indicator will blink when data is
transmitted or received by your 2.4GHz wireless client devices connected to your
router.
LAN Ports 1-4 (Link/Activity) LED: These LED indicators are solid green when the
Gigabit LAN ports 1-4 (Black) are physically connected to your wired network
devices (which are turned on) with a network or Ethernet cable. These LED
indicators will blink green while data is transmitted or received through your
router’s Gigabit LAN ports.
Internet Port (Link/Activity) LED – This LED indicator is solid green when your
router Gigabit Internet port is physically connected to the modem network or
Ethernet port with a network or Ethernet cable (modem turned on). The LED
indicator will be blinking green while data is transmitted or received through the
Gigabit Internet port of your router.
Power/WPS LED: The indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router. The
indicator will also blink when WPS is activated. The LED will stop blinking and
remain solid green automatically once WPS process is completed.
USB Share Port
5GHz Wireless LED
2.4GHz Wireless LED
LAN Ports 1-4 LEDs
Internet Port LED
Power/WPS LED