TRENDnet User’s Guide Table of Contents TEW-822DRE Accessing TEW-822DRE with product name:...........................................17 Multi-Language ...........................................................................................................17 Table of Contents......................................................................................2 System Settings ...................................................................................... 18 Product Overview ..................
TRENDnet User’s Guide Tools - Ping Test.........................................................................................................39 Tools (Access Point Mode) - Schedule ..............................................................40 Edit a schedule .......................................................................................................40 Delete a schedule ..................................................................................................
TRENDnet User’s Guide Product Overview TEW-822DRE Easy Setup Quick intuitive setup connects to either a WiFi AC or WiFi N network and adopts existing WiFi settings AC1200 Dual Band Broadcasts concurrent high speed 867 Mbps WiFi AC + 300 Mbps WiFi N networks Extreme Coverage Adjustable external antennas, high power amplifiers, and multiple antenna technology produces extreme wireless coverage Gigabit Port Gigabit port extends a high performance connection to a wired device No Clutter The extender plugs
TRENDnet User’s Guide *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions.
TRENDnet User’s Guide TEW-822DRE Hardware Features Adjustable Antenna Power Plug Network Port Operating Mode Switch Network Port Connect a network cable (Ethernet cable) to your network when operating in AP (Access Point) mode. Operation Position the Operation Mode Switch to Off to Mode Switch turn off the wireless. Position the switch to Extender to operate TEW-822DRE in Range Extender mode. Position the switch to AP to work in Access Point mode. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-822DRE Network Connect a network cable (Ethernet cable) to your computer for manual configuration. Wireless The Wireless LED shows the wireless connection between Range Extender and your wireless router. Blue Light: When it lights with solid blue, the Range Extender established a good wireless connection with your router. When it blinks, it means there are data running through the wireless connection.
TRENDnet User’s Guide TEW-822DRE Application Diagram TEW-822DRE is a dual band 802.11ac range extender which can extend your wireless router’s range and coverage. Furthermore, it can expand signals to both 2.4 GHz and 5 GHz bands to the clients for dual band concurrent connections. Simply plug the TEW-822DRE at a location in between your wireless router and your computer or mobile device to eliminate the dead spot of connection. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Range Extender Set Ups TEW-822DRE 3. Press and hold the WPS button on the router for 5 seconds to start WPS pairing. There are two ways to setup your Range Extender: by pushing Wi-Fi Protected Setup (WPS) button or web browser configuration. WPS Connection 1. Plug in the TEW-822DRE to a power outlet nearby your wireless router and position the operation switch to Extender. 4. The WPS will stop blinking and the Wireless LED will lit when the connection is established. 2.
TRENDnet User’s Guide 5. TEW-822DRE Install the TEW-822DRE in the final location. For maximum performance, install the TEW-822DRE in a location where there is at least 2 bars of connection from your WiFi router to a mobile device. If the Wireless LED light is blue, the wireless connection to the router is good. If the Wireless LED light is red, the wireless connection is weak. Consider to change the extender's location again to have better wireless connection to the router. © Copyright 2015 TRENDnet.
TRENDnet User’s Guide TEW-822DRE Web Browser Configuration 1. Plug in the TEW-822DRE to a power outlet nearby your wireless router and position the operation switch to Extender. 2. Open your computer or mobile device wireless network settings and search for TRENDnet822_2.4G_xxxx pre-encrypted wireless network (The xxxx is a random number. Please find your unique wireless name and pre-set WiFi password from the label comes with the product.
TRENDnet User’s Guide TEW-822DRE 3. Open the web browser and type http://tew-822dre or http://192.168.10.100 to access the administration page. (See trouble shooting page if you cannot access the administration page.) Alternatively, you can connect your computer to the TEW-822DRE with a network cable. Enter administrator login information. (The default user name is admin and the password is admin.) Connect a network cable (not included in the package) from your computer to the TEW-822DRE’s network port.
TRENDnet User’s Guide 5. TEW-822DRE Change your administrator password from the factory default setting and then click Next. 7. The TEW-822DRE will start searching for available wireless networks. 6. Choose manual setting to search and select your wireless router manually and then click on Next. (You can choose WPS to initialize the WPS pairing from the web management page here. Please see previous section WPS Connection for more detail.) © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-822DRE In the case that you want to specifically connect to TEW-822DRE or your wireless router, you can setup the extended network with a different name. Click Next after you choose your extended wireless network name. 8. Enter the WiFi password and then click Next. (When necessary, check on Show Password to make sure the WiFi password you entered is correct.) 10. Confirm the network setup and then click Next. 9. Choose the extended wireless network name.
TRENDnet User’s Guide TEW-822DRE 11. TEW-822DRE will reboot to apply the change. It will take about a minute before TEW-822DRE ready to work. 12. Relocate the TEW-822DRE and plug at a location between wireless router and your computer. Check the signal strength from the location you choose to the wireless router. If the signal strength is 2 bars or more. The signal strength is good from the wireless router. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-822DRE Access Point Set Up Connecting to your computer to TEW-822DRE The TEW-822DRE comes with pre-set wireless network name and WiFi password. Please find your unique wireless name and pre-set WiFi password from the label comes with the product. If you don’t have the label from the package later time, you can find the same information on the device label.) 1. Choose the TEW-822DRE wireless name from your computer. 2. Press and release the WPS button.
TRENDnet User’s Guide TEW-822DRE Range Extender Web Management System Management and Default Settings The TEW-822DRE has following settings: User name: admin Password: admin Dafault IP: 192.168.10.100 Accessing TEW-822DRE with product name: Access the Management page Select your preferred language in the TEW-822DRE login page. When your computer is on the same network of TEW-822DRE, you can also use the product name to access the management page. Just enter “http://tew-822dre” in your browser.
TRENDnet User’s Guide System Settings Main - Wizard TEW-822DRE Main - Network Settings Setup your management IP address. Run the setup wizard again for important setups. If you want to run the setup wizard again in later time, just click the wizard on the main menu of management page and follow through the settings. IPv4 Network Network Choose how you want the management IP to be Address set. Either with dynamic IP or static IP. (Default Assigned with : is set to static IP with 192.168.10.
TRENDnet User’s Guide TEW-822DRE Static IP Static IP Address IP Address : Enter the TEW-822DRE management IP address Subnet Mask : Management IP network range Gateway The default route going out of the network Address : Primary DNS Enter the primary domain name server IP Server : address Secondary DNS Enter the secondary domain name server IP Server : address DHCP Server Settings Enable DHCP Check this box to enable DHCP Server on TEWServer : 822DRE DHCP IP Assign a range of IP addresses to allocate Add
TRENDnet User’s Guide Main - System TEW-822DRE Password Setup TEW-822DRE system name and changing the administrator’s password. New password : Verify Password: Show Password: Enter the new administrator password here. Enter the new administrator password again. Check this box when necessary if you want to make sure the password you have entered is correct. Click Save Settings to save the changes Device Name Device Name : Enter the device name you want to be searched on the network.
TRENDnet User’s Guide TEW-822DRE Main - Time Settings The Time Setting allows you to setup the schedule control and recording the event log correctly. Current Time Current Showing the current date and sets in TEWDate/Time : 822DRE. Time Settings Enable NTP Check this box if you want to synchronize TEWServer: 822DRE with a network time server. NTP Server: Enter the address of the time server. (i.e. time.trendnet.com) Time Zone: Select the time zone of the country you are currently in.
TRENDnet User’s Guide Main – IPv6 (Access Point Mode) TEW-822DRE Static IPv6 Address Setup your IPv6 management IP address. IPv6 IPv6 Address : Choose the way to assign the IPv6 address: linklocal, static, or dynamic (auto-configuration). Link-Local IPv6 Address By default, the TEW-822DRE is set to link-local only. You can access the TEW-822DRE easily with its link-local IPv6 address.
TRENDnet User’s Guide TEW-822DRE Dynamic IPv6 Address Choose auto-configuration to get IPv6 address from DHCPv6 dynamically. IPv6 DNS Settings DNS Server : Choose “Obtain IPv6 DNS Server address automatically” or “Use the following IPv6 DNS server” to specify the way to get domain name service. Primary DNS Enter the primary domain name server IPv6 Server : address Secondary DNS Enter the secondary domain name server IPv6 Server : address Click Save Settings to save the changes © Copyright 2015 TRENDnet.
TRENDnet User’s Guide Wireless (Range Extender Mode) TEW-822DRE Enter the WiFi password and then click Next. (When necessary, check on Show Password to make sure the WiFi password you entered is correct.) Site Survey When TEW-822DRE is operating in Range Extender mode, you can refresh the wireless router link by searching for new wireless network. Navigate to Wireless and Site Survey to start wireless site survey. TEW-822DRE will start searching again.
TRENDnet User’s Guide TEW-822DRE Confirm the network setup and then click Next. TEW-822DRE will reboot to apply the change. It will take about a minute before TEW-822DRE ready to work. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Wireless (Access Point Mode) - Basic Set the TEW-822DRE wireless basic settings. Choose the appropriate wireless band and setup the connection requirements. TEW-822DRE 2.4GHz/5GHz Wireless Network Settings Enable Check the box to enable the wireless. And then Wireless : select the schedule between Always or the time schedule you setup. Click on Add New to add new schedule. (For schedule editing, see page 40 Tools (Access Point Mode) - Schedule for more detail.) Wireless Enter the 2.
TRENDnet User’s Guide Wireless Check on Enable Auto Channel Scan to switch Channel: wireless channels automatically. Or, uncheck the box to choose the wireless channel manually. Channel selection can be vary by region.
TRENDnet User’s Guide TEW-822DRE WPA-Personal: WiFi Protected Access is a more robust wireless security mechanism. And then enter the RADIUS server IP address, port number and shared secret. Channel Width: Shows the channel width settings. Select the WPA or WPA2 (recommended) or automatic choose WPA and WPA2 mode and cypher type in TKIP or AES (recommended). Channel: Shows the TEW-822DRE 2.4GHz wireless is currently communicating on which channel.
TRENDnet User’s Guide TEW-822DRE Wireless (Access Point Mode) - Advanced Setting the advanced wireless performance. Advanced Wireless Settings Transmit Wireless signal transmission power. Choose the Power : lower number when you have crowed wireless devices. So, the TEW-822DRE has toned down signal to prevent wireless interference. WMM Enable: Check to enable or disable WMM.
TRENDnet User’s Guide Wireless (Access Point Mode) - WPS WPS is the simplest way to connect a wireless client to the TEW-822DRE. You don’t have to select the encryption mode and fill in a long encryption passphrase every time you want to setup a wireless connection. Just press a button on both the wireless client and the TEW-822DRE, and WPS will do the rest for you. The TEW-822DRE has hardware WPS button on the side of the range extender.
TRENDnet User’s Guide TEW-822DRE Status - System Information Lists all the TEW-822DRE basic information. System Firmware Showing the current firmware version TEWVersion : 822DRE is running. Time: Showing the current TEW-822DRE system time. LAN Device Mode: The TEW-822DRE is running on Range Extender (AP Repeater) mode or Access Point (AP) Mode. MAC Address: MAC address of the network port. Connection: How the LAN (management) IP gets its address. Either in dynamic mode or static mode.
TRENDnet User’s Guide TEW-822DRE Channel: Shows the TEW-822DRE 2.4GHz wireless is currently communicating on which channel. 5GHz Wireless MAC address: MAC address of TEW-822DRE 5GHz wireless interface. SSID: Shows current Service Set Identifier is currently in use. This SSID is human readable and performs as ESSID to setup wireless groups. Security Mode: Shows which type of security encryption is currently in use for this wireless connection. Channel Width: Shows the channel width settings.
TRENDnet User’s Guide Status - Local Logs TEW-822DRE Log Options Log Options: All system logs of TEW-822DRE saves locally. Access this page you can quickly and easily browse through or find out the event you are looking for. Filter the logs listed in the viewer. Select the kind of log you want to list and click on Apply log Options Now. Download Download Click Download to download the log file from Logs: TEW-822DRE to your computer. Log Details Click buttons to control the log page display.
TRENDnet User’s Guide Status - Statistics TEW-822DRE The traffic statistics accumulate the traffic status. By reviewing these numbers, you can easily identify the network problem with specific traffic pattern. 2.4GHz Wireless Traffic through 2.4GHz wireless network port : LAN Traffic through network port : Sent: Sent from network port. Received: Received by the network port. Tx Packets Dropped: How many packets were dropped were delivered from LAN port to other devices.
TRENDnet User’s Guide TEW-822DRE Status - Wireless Client List Status (Access Point Mode) – IPv6 List all the wireless clients connecting to TEW-822DRE. Lost out the IPv6 settings and status. 2.
TRENDnet User’s Guide Access (Access Point Mode) – MAC Filter Every network device has a unique, 12-digit MAC (Media Access Control) address. Using MAC filters, you can allow or deny specific computers or mobile devices from using this access point’s wireless network. You can setup up to 20 MAC address entries. TEW-822DRE MAC Address Filter Configure MAC filtering below : Choose the appropriate selection to turn MAC filtering on or off.
TRENDnet User’s Guide Access (Access Point Mode) – Multiple SSID You can enable multiple wireless network (SSID), up to 4 in each wireless band, creating different wireless credential for different group of users. TEW-822DRE Wireless Security You need to setup the wireless security when you enable a new wireless network. The wireless security settings are all the same. Please reference Wireless (Access Point Mode) - Basic on page 26 for more setting detail.
TRENDnet User’s Guide Access (Access Point Mode) – User Limit TEW-822DRE Tools - Upload Firmware Limit the maximum wireless users on each band. You can set the limit up to 32 client connection. Maximum Wireless Clients on 2.4GHz/5GHz Enable Limit : Check this box to start limiting the number of connections. Max. Clients : Set the number between 2 and 32 as the number of wireless clients are limited. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Tools - Backup Settings TEW-822DRE Tools - Ping Test To check your network connection, you can use the PING Test tool from yourTEW-822DRE. Enter the IPv4 address you want to ping and click Ping. The result will be showed in the terminal down below. Save System Settings Restore System Settings Click Save to export settings to your computer.
TRENDnet User’s Guide Tools (Access Point Mode) - Schedule TEW-822DRE Edit a schedule Together with other controls, you can set up the schedule to enable or disable that feature. Set up daily or weekly schedule for power saving or security reasons. Click on the Edit icon on the schedule you want to edit. The schedule settings will be copied to the fields above. Change your settings and then click on Update. Delete a schedule To delete a schedule, click on the Trash want to delete.
TRENDnet User’s Guide Tools - Email Notification TEW-822DRE can send out email notification when the system log is full. TEW-822DRE Email Notification From Email Enter the email address where the email Address: notification is sending from.
TRENDnet User’s Guide TEW-822DRE Tools - Remote Logging Tools - LED Control To save the system log to remote Syslog Server to real time monitor your TEW-822DRE, you can setup the Syslog Service Settings to send the system log over the network. All LED indicators are turned on by default. You can turn them off so they are not create weird lighting at night. Check on the LED Disable and then Save Settings to disable all LEDs.
TRENDnet User’s Guide TEW-822DRE Tools - Logout Logout from the system management securely. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Technical Specifications Wireless BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with Modulation: OFDM AntennaG: External antenna Frequency: FCC: 2.412 - 2.462 GHz, 5.180 - 5.240 GHz, 5.745 5.825 GHz ETSI: 2.412 - 2.472 GHz, 5.180 - 5.580 GHz, 5.660 - 5.700 GHz TEW-822DRE 802.11n: -61 dBm (typical) @ 300 Mbps 802.11ac: -51 dBm (typical) @ 867 Mbps Encryption: 64/128-bit WEP, WPA / WPA2-PSK *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications.
TRENDnet User’s Guide TEW-822DRE Troubleshooting Situation: I typed http://tew-822dre but I am not able to access the unit. What should I do? Situation: I entered http://192.168.10.100 but I am not able to access the unit. What should I do? Solution: Solution: The host name resolution is good for most systems, including Windows, OS X, and iOS. Please enter the IP address (default: 192.168.10.100) if you experience difficulty in accessing the range extender.
TRENDnet User’s Guide TEW-822DRE Situation: How can I access the TEW-822DRE once it is setup? Solution: You can use its host name (http://tew-822dre) or IP address to access the TEW-822DRE. After repeater setup, the TEW-822DRE will get an IP address from your router (DHCP). Check the DHCP client list on your router if you want to access the TEW-822DRE with its IP address. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Appendix TEW-822DRE 4. Click Properties on the selected network adapter. How to setup a static IP address on your computer Note: Before setup, make sure that you have a unique static IP address available which will not cause the network address collision. Windows 8 1. Open the Charms bar by moving the mouse to the top right corner of the screen or press the Windows Key + C and click on Search. 2. Type “network” in the search box and click Settings to focus your search. 5.
TRENDnet User’s Guide 6. Click Use the following address and enter the static IP address and related information. For setting up the TRENDNET PRODUCT, you can enter 192.168.10.10 as your IP address, 255.255.255.0 as the Subnet mask. Leave the other fields blank. Click OK to apply the changes. TEW-822DRE Windows 7 1. Click Control Panel from the Start menu. 2. Type “network” in the search box to focus your selection. Click on Network and Sharing Center © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 3. Click Change adapter settings on the left-hand side. TEW-822DRE 6. Click Use the following address and enter the static IP address and related information. For setting up the TRENDNET PRODUCT, you can enter 192.168.10.10 as the IP address, 255.255.255.0 as the Subnet mask. Leave other fields blank. Click OK to apply the changes. 4. Click Properties on the selected network adapter. 5.
TRENDnet User’s Guide OS X 1. Click the Apple logo in the top-left corner of your screen. Click on System Preferences... . In the Internet and Wireless section, click on Network. TEW-822DRE 2. Select the network card you want to configure on the left banner (e.g. Wi-Fi ). Click Advanced. 3. Choose TCP/IP. In Configure IPv4, select Manually. Input the static IP address, subnet mask, and your router IP address. (In order to setup the TRENDNET PRODUCT, you can put in 192.168.10.10 as the IP address, 255.255.
TRENOnet User's Gu1de TEW-822DRE 4. Click Apply to apply the changes. ' " ""' 0\11 l .. ... ." ...........-... ....<>....... . ....... '"' "'"".._, • .,... v .l-N • ,..,..,, '"''':"""''""'···"""'" © Copyright 2015 1RENOnet. All Rights Reserved.
TRENDnet User’s Guide TEW-822DRE Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRENDnet User’s Guide Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. TEW-822DRE Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
TRENDnet User’s Guide Europe – EU Declaration of Conformity TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. TEW-822DRE This product is herewith confirmed to comply with the Directives. Directives Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC R&TTE Directive 1999/5/EC Ecodesign Directive 2009/125/EC RoHS Directive 2011/65/EU REACH Regulation (EC) No.
TRENDnet User’s Guide Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano[Italian] Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] TRENDnet tímto prohlašuje, že tento TEW-822DRE je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES, 2006/95/ES a 2009/125/ES.
TRENDnet User’s Guide TEW-822DRE ErP Statement Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Toto síťové zařízení je rok Energy Související produkt (ErP ou dopisem), automaticky přepne do úsporného pohotovostního módu do 10 minut bez datového přenosu síly. Když přístroj nepoužíváte, lze jej ict vypnut pomocí tlačítka napájení, nebo jednoduše odpojte napájecí adaptér pro další úspory energie.
TRENDnet User’s Guide Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] mygtuką, arba tiesiog atjunkite maitinimo adapterį sutaupyti dar daugiau energijos. Tinklo budėjimo: 4.79W Išjungimo būsena: 0.16W Dit netwerkapparaat is jaar-energie gerelateerde product (ErP ou per brief) schakelt automatisch naar een energiebesparende stand-by mode Binnen 10 minuten geen gegevensoverdracht.
TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-822DRE – 3 Years Warranty If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer.
