User's Guide

TRENDnet User’s Guide
TEW-822DRE
© Copyright 2015 TRENDnet. All Rights Reserved.
6
Adjustable
Antenna
Hardware Features
Power Plug
Network Port
Operating Mode
Switch
WPS Button
+
LED Indicator
Power Plug
Release Button
Network Port Connect a network cable (Ethernet cable) to
your network when operating in AP (Access
Point) mode.
WPS
(Wi-Fi Protected
Setup)
Button + LED
Indicator
Push and release the WPS button to activate
WPS copying wireless settings from your
router (press 5 sec. in Range Extender mode)
or connect to the client (press 1 sec. in Range
Extender or AP mode). The LED indicator will
start blinking when WPS pairing is activated.
Operation
Mode Switch
Position the Operation Mode Switch to Off to
turn off the wireless. Position the switch to
Extender to operate TEW-822DRE in Range
Extender mode. Position the switch to AP to
Reset Button Resets your repeater. Push and hold this
button for 10 seconds with a pin or paper clip
to reset configuration to factory default.
work in Access Point mode.
Power Plug
Release Button
To exchange different style of power plug.
(This package comes with only one power
plug.)