Datasheet

Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Device Interface 4 x Gigabit Ultra PoE ports
2 x Gigabit SFP slots
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Performance Data RAM Buffer: 1024 KB
Switching Fabric: 12 Gbps
MAC Address Table: 1 K entries
Jumbo Frame: 9 KB
Forwarding rate: 8.9 Mpps (64-byte packet size)
Special Features Hardened components rated for extreme temperatures
Dual redundant power inputs
Auto-Negotiation
Auto store and forward architecture
Automatic address learning and address aging
ESD 8KV protection
DC Power Input: 48 - 56 V DC
Compatible power supply: TI-S24048 (sold separately)
Consumption: Max. 5.76 Watts (no PD)
PoE PoE: up to 15.4 watts per port
PoE+: up to 30 watts per port
Ultra PoE: up to 60 watts per port
Total PoE budget: 240 watts
Terminal Block Redundant power inputs, alarm relay contact, 6 pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5Nm / 0.56 Nm
Wire strip length: 7-8mm
DIP Switch 1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
2: OFF (SFP 1000M, default), ON (SFP 100M)
Alarm Relay
Contact
Relay outputs with current carrying capacity of 1A, 24V DC
Short circuit mode when two power sources are connected
Open circuit mode when only one power source is connected
MTBF 510,304 hours
Housing IP30 metal case
DIN-rail mount
Wall mount
Grounding point
8 KV ESD protection
Operating
Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating
Humidity
Max. 95 % non-condensing
Dimensions 143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.)
Weight 514 g (1.1 lb)
Certifications CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
Warranty Limited life time warranty
PACKAGE CONTENTS
TI-UPG62
Quick Installation Guide
Removable terminal block
DIN-rail and wall mount kit
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com TRENDnet
is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change
at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 6/11/2018
TI-UPG62
Specifications