Datasheet

TPE-T160H

The 16-Port 10/100 Mbps PoE+ Switch, model TPE-T160H, delivers data and power over existing Ethernet cables to Power over Ethernet

(PoE) devices such as Access Points and IP Cameras. It supplies up to 30 Watts of power per port with a 250 Watt power budget. A

convenient on/off button is located on the back of the switch and a rack mount kit is included.

•16 x 10/100 Mbps PoE+ ports

•Up to 30 Watts per port with a 250 Watt total power budget

•3.2 Gbps switching capacity

•Rack mount kit included

•Use with TRENDnet’s PoE Splitter to network and power non-PoE devices

•Limited lifetime warranty

16-Port 10/100 Mbps PoE+ Switch

TPE-T160H (v1.0R)

PAGE 1
TPE-T160H 16-Port 10/100 Mbps PoE+ Switch TPE-T160H (v1.0R) • 16 x 10/100 Mbps PoE+ ports • Up to 30 Watts per port with a 250 Watt total power budget • 3.2 Gbps switching capacity • Rack mount kit included • Use with TRENDnet’s PoE Splitter to network and power non-PoE devices • Limited lifetime warranty The 16-Port 10/100 Mbps PoE+ Switch, model TPE-T160H, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras.
PAGE 2
TPE-T160H Hardware Rack Mountable Rack mountable metal enclosure with included mounting kit PoE+ Supplies up to 30 Watts of PoE power per port with a 250 Watt power budget On/Off Convenient on/off switch Ports 16 x 10/100 Mbps PoE+ ports LED Indicators LED indicators convey port status Switching Capacity 3.
PAGE 3
TPE-T160H Specifications Standards • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x • IEEE 802.3af (15.4 Watts/port) • IEEE 802.3at (30 Watts/port) • IEEE 802.3az Device Interface • 16 x 10/100 Mbps PoE/PoE+ Ports • LED indicators • Power switch Data Transfer Rate • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Performance • Data Ram Buffer: 1.25 MB • Switch Fabric: 3.2 Gbps • MAC Address Table: 4K entries • Forwarding rate: 2.