IVT BlueSoleil™ User Manual Version: 1.4 This document describes how to use IVT BlueSoleil™.
IVT BlueSoleil™ User Manual Contents 1 1.1 1.2 1.3 2 2.1 2.2 2.3 2.4 2.5 2.6 3 3.1 3.2 4 4.1 4.2 4.3 4.4 4.5 4.6 5 5.1 5.2 5.3 6 6.1 6.2 6.3 6.4 6.5 7 7.1 7.2 7.3 8 8.1 8.2 8.3 8.4 8.5 9 9.1 9.2 BlueSoleil™ Introduction............................................................................ 1 Profiles .................................................................................................... 1 New features in BlueSoleil 1.4 ....................................................................
IVT BlueSoleil™ User Manual 9.3 9.4 9.5 9.6 10 10.1 10.2 10.3 10.4 10.5 11 11.1 11.2 12 12.1 12.2 12.3 13 13.1 13.2 13.3 14 14.1 14.2 14.3 15 15.1 15.2 15.3 16 16.1 16.2 16.3 17 17.1 17.2 18 Transfer Objects from a Bluetooth Cellular Phone to a Computer .................... 74 Transfer Objects between Two Computers................................................... 75 Configure OPP Service.............................................................................. 76 Using OPP in Microsoft Outlook .....
IVT BlueSoleil™ User Manual 1 BlueSoleil™ Introduction BlueSoleil™ is a Windows-based Bluetooth Wireless software suite from IVT Corporation. It is fully compliant to the latest Bluetooth SIG specifications. BlueSoleil™ incorporates Bluetooth and computer technologies to enable users to wirelessly access computing devices, form networks, and exchange information. 1.1 Profiles BlueSoleil™ V1.4 includes ten Bluetooth profiles.
IVT BlueSoleil™ User Manual 1.2 New features in BlueSoleil 1.4 BlueSoleil version 1.4 is ready now with even more exciting new features, multimedia profiles are added into BlueSoleil. They include: 1.3 ♦ Headset With this feature, users can use Bluetooth Headset to listen to music, to record sound or to chat with others. Headset increases the user’s mobility.
IVT BlueSoleil™ User Manual With these functions, users can setup ad-hoc Personal Area Network quickly and share the Internet accessing among computer. ♦ More Bluetooth Serial Ports More Bluetooth Serial Ports are supported, with 4 Bluetooth Serial Ports for out-going connections and 2 Bluetooth Serial Ports for incoming connections. ♦ Mobile HID With this feature, users can make cellular phones like Ericsson T39 or T68 to work like a mouse and keyboard.
IVT BlueSoleil™ User Manual 2 BlueSoleil™ Basic Operations 2.1 Start BlueSoleil™ After installing BlueSoleil™, there are two ways to start the program: 1. A BlueSoleil™ shortcut icon on the Windows desktop. 2. An IVT BlueSoleil™ program group entry in the Windows’ Start | Programs menu. Double-click the BlueSoleil™ shortcut icon on the desktop or click the BlueSoleil™ menu item on the Start | Programs | IVT BlueSoleil™ menu to start the BlueSoleil™ software.
IVT BlueSoleil™ User Manual 2.3 BlueSoleil™ Main Window The BlueSoleil™ Main Window displays all surrounding Bluetooth devices. From the BlueSoleil™ Main Window users can search for surrounding Bluetooth devices and can execute connect/ disconnect functions. Remote Device Serivce Icon Local Device Icon Remote Device Figure 2.2: BlueSoleil™ Main Window The main elements in the BlueSoleil™ Main Window are: ♦ My Device Icon ♦ Remote Bluetooth Device Icons ♦ Bluetooth Service Icons 2.3.
IVT BlueSoleil™ User Manual 2.3.2 Remote Bluetooth Device Icons The icons in the table below represent the remote Bluetooth devices. Device Type Icon Headset Keyboard LAN Access Point Laptop Mobile Modem Mouse Personal Computer PDA Printer Scanner Unknown device The following colors are used to indicate the status of the remote Bluetooth device: ♦ White (Idle) This is the normal status of the device. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual ♦ Yellow (Selected) The device has been selected by the user. ♦ Green (Connected) The device has been connected. Functions: 2.3.3 ♦ Single-click to select. ♦ Double-click to get the services remote Bluetooth device supports. ♦ Right-click to display the pop-up menu with related operations. Bluetooth Service Icons The Bluetooth Service Icons represent the Bluetooth services supported by the remote device.
IVT BlueSoleil™ User Manual AV Headphone Basic Image Headset Audio Gateway The following colors are used to indicate the status of the Bluetooth service: ♦ White (Idle) This is the normal status. ♦ Pink (Available) The Bluetooth service is available for the selected device. ♦ Yellow (Selected) The service icon has been selected by the user. ♦ Green (Connected) The service is connected. Functions: ♦ Hover the mouse over the icon to display the service name. ♦ Single-click to select the service.
IVT BlueSoleil™ User Manual Figure 2.4: BlueSoleil™ Service Window Main Elements: ♦ 2.4.1 My Service Icons My Service Icons These icons represent ‘my Bluetooth services’. My Bluetooth Service Icon Personal Area Networking Serial Port LAN Access Object Push Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual File Transfer Information Synchronization AV Headphone Basic Image Headset AG The following colors indicate the status of the Bluetooth service: 2.4.2 ♦ White (Idle) Normal status. ♦ Pink (Started) My Bluetooth service is started. ♦ Green (Connected) A remote device has connected to my Bluetooth service. Start/Stop a Bluetooth Service Select a service icon in service window, and double-click to start/stop a service or select right popup menu to send command. 2.4.
IVT BlueSoleil™ User Manual the names of the found devices. Double clicking the local device or double clicking one of the remote devices (to start to search profiles it supports) will stop the inquiry procedure. Figure 2.5 Inquiry Menu Method 2: Add Device from History List If there are more than 7 devices to find within the radio range, you can add the device you have used to the orbit from the history device list. Click Tools Menu and select Add Device from History.
IVT BlueSoleil™ User Manual Figure 2.7 Add Bluetooth Neighbour Device Manually dialog Input the device address and click OK, and then the device will be added to the end of the orbit. However, the device type will be unknown. The shortcut key to open Add Bluetooth Neighbor Device Manually dialog box is Ctrl+N. The remote devices found will be added to the orbit. Refer to the following window (Figure 2.8). Figure 2.8 Devices can be add into the main window 2.5.
IVT BlueSoleil™ User Manual Double click the remote Bluetooth device you want to connect and you will be asked to enter the Bluetooth Passkey. Please type the Bluetooth Passkey in the Passkey field (Figure 2.9). Figure 2.9 Input Passkey Meanwhile, there will be a Bluetooth Passkey dialog box prompted on the remote laptop or desktop equipped with the Bluetooth device to ask you to enter passkey. The Bluetooth passkey should be the same between paired devices.
IVT BlueSoleil™ User Manual 2.6 Start Or Stop A Bluetooth Service Connection After you have finished the pairing process, it means that you have built the connection between the client side and remote side. You may start to use the Bluetooth services the associated Bluetooth device provides. You can refer to 4.2 Communication Between Two Computers as a more detailed example. 2.6.
IVT BlueSoleil™ User Manual Figure 2.12 The connection has been established 2.6.3 Stop A Bluetooth Service Connection There are two ways to stop the service: ♦ Select a started service and right click the service. On the popup menu, select Stop Service. The service icon turns white. The service is stopped. ♦ Select a started service. Select My Services menu and highlight Stop Service. The service icon turns white. The service is stopped. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual 3 Bluetooth Security 3.1 Introduction Bluetooth introduces security features to protect users from unauthorized access of local data and encrypt data in the air. Three levels of security is defined in Bluetooth: ♦ Low (no security): Local device will not initiate any security procedure. ♦ Medium (service-level enforced security): Local device does not initiate security procedures before user access local Bluetooth services.
IVT BlueSoleil™ User Manual 3.2 ♦ Authentication Authentication is used to verify identity; it requires a passkey or link key from the remote device. When an Authentication procedure is initiated by either local device or remote device, a dialog is shown to ask for entering Bluetooth Passkey. Only when passkeys from both sides are identical, can authentication succeed.
IVT BlueSoleil™ User Manual 3.2.1 General Property Page Figure 3.1: Security Configuration Dialog Security Level ♦ Low When Low is checked, normally other devices may access your device freely, which means that they don't need to input the Bluetooth passkey. However, if the other device set its own security level to High, you are also required to input the passkey. ♦ Medium The medium level is service level security. You can assign access right for specified service to different devices.
IVT BlueSoleil™ User Manual ♦ 3.2.2 Enable Data Encryption If the item is checked, the transmitted data will be encrypted into an unreadable format. Devices Property Page Figure 3.2: Devices Property Page when you establish connection with a paired device, you needn't input a passkey again. A link key has been created and stored for the paired relationship.
IVT BlueSoleil™ User Manual Figure 3.3: Authorization Dialog The services shown in Service Name list are those need Authentication. Configure in Services Property Page. If a service name is checked, the device will be a trusted device for the service. 3.2.3 Services Property Page Only when the Security Level is set as Medium in General Property Page, the property page is enabled. Figure 3.4: Services Property Page Authentication Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual ♦ Checked If you check the Authentication box after a service name, when a not paired device access the service, a passkey is required. ♦ Not Checked The security level of the service will be Low. Any device may access the service freely. Encryption If check Encryption after a service name, the transmitted data for the service will be encrypted into an unreadable format.
IVT BlueSoleil™ User Manual 4 Personal Area Networking 4.1 Introduction The Bluetooth Personal Area Networking (PAN) is a Bluetooth application, which enables devices to form an ad-hoc network or to access a remote network through a network access point. The PAN application can be used in the following scenarios: ♦ Two or more computers (or PDAs) can be connected to form a Group Ad-hoc Network (GN) and can visit each other using Windows Network Places or any application based on TCP/IP. (Figure 4.
IVT BlueSoleil™ User Manual Figure 4.3: Access LAN through BlueSoleil NAP ♦ Two or more computers (or PDAs) can access the Internet through BlueSoleil™. (Figure 4.4) In this scenario, there are two network adapters for the BlueSoleil NAP: the WAN adapter is connected to the Internet and the BT network adapter is used for Bluetooth connections from the PANUs. The BlueSoleil NAP acts as a TCP/IP gateway, and the PANUs can access the Internet through the BlueSoleil NAP. Figure 4.
IVT BlueSoleil™ User Manual Step 1: Insert Bluetooth Devices in both computers and start BlueSoleil™ in both computers. Step 2: Set device name of each computer to anything you want. Here they are named Computer A and Computer B. Step 3: ♦ In the BlueSoleil™ Main Window of Computer A, click My Bluetooth | Property…. Enter ‘Computer A’ in the device name field in the My Bluetooth Device window. ♦ Repeat for Computer B. Set the Security Level.
IVT BlueSoleil™ User Manual on the GN side. (Notes: To use DHCP, the BT Network Adapter on the client side must be set to obtain an IP address automatically. The IP address is in the form of 192.168.18.xxx.) ♦ Click Apply or OK button to save the configuration. ♦ Right-click the Personal Area Networking icon again, then choose Start Service. (Figure 4.7) Figure 4.6: Set up Bluetooth Personal Area Network Configuration Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Figure 4.7: Start PAN Service on Computer A Step 5: Step 6: Search for Computer A on Computer B. ♦ Double-click the My Device Icon (center ball). The surrounding discovered Bluetooth devices appear. ♦ Check to see if Computer A appears. If it does not appear, double-click the My Device Icon again. Repeat the operation until you find Computer A. Find the PAN service on Computer A. ♦ Double-click the Computer A device icon on Computer B.
IVT BlueSoleil™ User Manual Figure 4.9: PAN service is found Step 7: Connect to Computer A. ♦ Right-click the PAN service icon; select Connect on the pop-up menu. (Figure 4.10) ♦ The connection is established successfully ( Figure 4.11). Wait until the valid IP address is shown on the bottom right status bar on both Computer A and Computer B. If you enable the DHCP server on the server side, the IP address appears as “192.168.18.xxx”. If not, the IP address appears as “169.254.xxx.xxx”. Figure 4.
IVT BlueSoleil™ User Manual Figure 4.11: Connection is established successfully. Step 8: Computer A and Computer B are now connected. On Computer B, go to Windows | My Network Places to find Computer A and copy files. Figure 4.12 shows where to input Computer A’s name. In Figure 4.12, Computer A is named ‘mike’. Figure 4.12: Find Computer A in My Network Places Step 9: To disconnect the PAN connection, disconnect from either Computer A or from Computer B.
IVT BlueSoleil™ User Manual ♦ On Computer A, right-click on the PAN service icon in service window and choose Stop Service. Figure 4.13: Disconnect the PAN service from Computer B Advanced Usage: ♦ Computer A is now the center node. Other computers, for example, Computers C, D and E, can connect to Computer A with BlueSoleil™ following the same steps as those for Computer B. Computer A supports up to 7 connections at the same time.
IVT BlueSoleil™ User Manual it on. Step 2: Insert a Bluetooth Device into the computer. Step 3: Start BlueSoleil™ in the computer. Step 4: Connect Computer A to Ethernet PAN-NAP B 1. Go to Computer A, double click My Device Icon until you find the device Ethernet PAN-NAP B. 2. Find the PAN service on Ethernet PAN-NAP B by double clicking the Ethernet PAN Bridge B device icon. Enter the Bluetooth passkey (if security is set to High on either side) to start authentication.
IVT BlueSoleil™ User Manual Figure 4.16: Successful connection to PAN-NAP Step 5: IP address configuration of the BT Network Adapter on Computer A. ♦ Right-click on My Network Places and select Properties. (Figure 4.17) ♦ Right-click the Local Access Connection 2 on the Network and Dial-up Connections window, and select Properties. (Figure 4.18) Figure 4.17: Right-click on My Network Places Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Figure 4.18: Network and Dial-up Connections ♦ On the Local Area Connection 2 Properties window, select the Internet Protocol (TCP/IP) item and click on Properties. (Figure 4.9) ♦ Set the IP address to be in the same subnet as the other computers in the LAN. (Figure 4.20). Figure 4.19: Find Internet Protocol (TCP/IP) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 4.20: Set the IP address Note: When Computer A connects to Ethernet PAN-NAP B it accesses the LAN as if it is attached to the LAN directly. The network properties of Computer A must be the same as the computers in the LAN, that is, Computer A and the computers in the LAN must be in the same subnet and have the same subnet mask. For example, if the computers in the LAN use DHCP for IP addressing, then Computer A needs to be configured to use DHCP.
IVT BlueSoleil™ User Manual Step 1: Step 2: ♦ Start IVT BlueSoleil™ on both Computer A and Computer B. Please ♦ refer to “Section 3.2:Communication Between Two Computers”, and complete Steps 1 to 4. Start the PAN service on Computer A. ♦ In the BlueSoleil™ Main Window, click View | Service Window. ♦ In the Service Window, right-click the Personal Area Networking icon.
IVT BlueSoleil™ User Manual Figure 4.21: Access Outside LAN Network Configuration 4.5 Access Internet through IVT BlueSoleil™ The following sections outline how to enable Computer B to access the Internet through Computer A. Computer A: Computer B: Desktop Notebook/ Laptop A Bluetooth Device A Bluetooth Device Windows 2000 Windows 2000 IVT BlueSoleil™ IVT BlueSoleil™ Network Adapter connecting to the Internet Step 1: Step 2: ♦ Make sure Computer A can access Internet.
IVT BlueSoleil™ User Manual Figure 4.22: Access Outside WAN Network Configuration Advanced Usage: ♦ Computer A is now the center node of the network. Other computers with BlueSoleil™ installed, for example, Computers C, D and E, can connect to Computer A following the same steps as those for Computer B and access the Internet through Computer A. Computer A supports up to 7 connections at the same time.
IVT BlueSoleil™ User Manual Figure 4.23: Service Configuration Setting Items: ♦ Auto start this service when my Bluetooth starts Check this option to automatically start my PAN service the every time BlueSoleil™ is started. Work Mode ♦ Set up Bluetooth Personal Area Network Choose this item to run in the GN mode. Check Enable DHCP Server, and a DHCP server will be started on the server side, so other devices will obtain an IP address (192.168.18.xxx) from the DHCP server after they connected to the GN.
IVT BlueSoleil™ User Manual 5 Dial-Up Networking 5.1 Introduction The Bluetooth Dial-up Networking (DUN) service allows a Bluetooth-enabled client to access the Internet wirelessly through a modem on another Bluetooth device or a cellular phone. The other Bluetooth device or the cellular phone is called the gateway (server) as it provides access to the public network. The DUN profile can be used in the following scenario: ♦ 5.
IVT BlueSoleil™ User Manual number, for example, “1”. 4. On the BlueSoleil™ side, the Enter Bluetooth Passkey window pops up requesting the Bluetooth passkey. Input the same Bluetooth passkey you have input in the T39 and click OK. 5. Once the pairing process is successfully complete, the T39 device icon is displayed in the Main Window of Computer A. At the meanwhile, the following dialog pops up asking you whether Create a Shortcut on the windows desktop.
IVT BlueSoleil™ User Manual Figure 5.1: Connect BlueSoleil™ DUN Connection Step 6: Dial to Internet 1. The Connect BlueSoleil™ DUN Connection window appears (Figure 5.1). 2. Input a valid username, password and the Internet Service Provider’s (ISP’s) phone number, then click the Dial button. 3. If the dial-up is successful, a small icon appears on the bottom right hand of the Windows taskbar, indicating that the dial up connection is successfully established. 4.
IVT BlueSoleil™ User Manual Figure 5.2: BlueSoleil™ DUN Connection Status window 5.3 Settings for Dial-up Networking Profile (client side) in Windows98/Me Before using the Dial-up Networking (DUN) profile in Windows98/Me, ensure a Dial-up Adapter is already installed on the client computer. 5.3.1 Check if a Dial-up Adapter is installed Step 1: Select the Control Panel from the Start |Settings menu. Step 2: Double-click the Network icon. (Figure 5.3) Copyright © 2001, IVT Corporation, http://www.
IVT BlueSoleil™ User Manual Figure 5.3: Windows Control Panel Step 3: Check if a Dial-up Adapter appears in the Network Component list. (Figure 5.4) Step 4: If a Dial-up Adapter is not found, then click Add to install one. Figure 5.4: Install Dial-up Adapter Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Step 5: Select Adapter from the Network Component list and click Add. (Figure 5.5 and Figure 5.6) Figure 5.5: Network Component list Figure 5.6: Select Adapter as the Network Component Type Step 6: Select Microsoft from the Manufacturers list on the left-hand side and select Dial-up Adapter in the Network Adapter list on the right hand side. (Figure 5.7 and Figure 5.8) Figure 5.7: Select Network Adapters (1) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Figure 5.8: Select Network Adapters (2) Step 7: Click OK to return to the Network property sheet. (Figure 5.9) Figure 5.9: Network property sheet Step 8: Click OK to close the Network property sheet. A message box pops up, click Yes to restart the computer. (Figure 5.10). Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 5.10: Restart computer Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 6 Bluetooth Serial Port 6.1 Introduction The Bluetooth Serial Port (SPP) provides a virtual serial port via Bluetooth as an alternative to a hardwired serial cable between a computer and device. Any program that uses a standard serial port can use the Bluetooth serial port without any change. IVT BlueSoleil™ provides three Serial Port services, you can connect with three remote devices and be connected with three remote devices at the same time through serial ports.
IVT BlueSoleil™ User Manual Figure 6.1: Double-click the Computer A device icon ♦ The connection is established successfully as shown in Figure 6.2. And the serial port number is shown on the right bottom status bar on Computer B. (Figure 6.3) Figure 6.2: The connection is established successfully Figure 6.3: The serial port number is shown Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Note: You can initiate three connections between the two computers through three serial ports. And at the same time, you can also be connected with three remote devices if you provide three SPP services. 6.3 Use SPP to Print a Document This section outlines the steps involved in connecting a computer to a Bluetooth Printer Adapter using SPP.
IVT BlueSoleil™ User Manual Step 1: Insert the Bluetooth Device into the computer. Step 2: Start BlueSoleil™ in the computer. Step 3: Connect Computer A to the Bluetooth Cellphone B using SPP. 1. Go to Computer A; double click the My Device icon’ until you find the device Bluetooth Cellphone B. 2. Double-click the Bluetooth Cellphone B device to pair with it. If pairing is finished successfully, then find it’s SPP service. 3. Double-click the SPP service icon to start connecting SPP. 4.
IVT BlueSoleil™ User Manual Step 9: If you want to disable Cellphone B controlling computer A,click Close button. The Close button becomes to Open button automatically. Or press down the No key in Cellphone B to exit Controlling window. The function of cellphone key map: 6.5 6.5.
IVT BlueSoleil™ User Manual Figure 6.9: SPP Service Configuration. Setting Items: ♦ Auto start this service when my Bluetooth starts Check this option to automatically start my Bluetooth SPP service #(1,2) every time BlueSoleil™ is started. (Figure 6.9) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 7 Bluetooth File Transfer 7.1 Introduction The File Transfer profile (FTP) supports the file transfer usage model, which offers the ability to transfer files from one Bluetooth device to the other. The FTP profile can be used in the following scenarios: ♦ 7.2 A computer can transfer files to/from another computer. Transfer files to/from a Computer This section outlines the steps in transferring files between Computer A and Computer B.
IVT BlueSoleil™ User Manual Figure 7.1: The connection is successfully established Figure 7.2: The remote folder is displayed Step 5: Copy files and directories. ♦ From Computer B to Computer A – upload Select files\ directories on Computer B and drag files into the Remote Shared Folder. (Figure 7.3) ♦ From Computer A to Computer B – download Select files\ directories from the Remote Shared Folder and drag files into the desktop or a folder on Computer B. (Figure 7.
IVT BlueSoleil™ User Manual Figure 7.3: Upload files to Computer A Figure 7.4: Download files from Computer A Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 7.3 FTP Configuration In the BlueSoleil™ Service Window, right-click the File Transfer icon. On the pop-up menu, select Properties to configure the ‘my FTP service’ (Figure 7.5). Figure 7.5: Configure FTP service Setting Items: ♦ Auto starts this service when my Bluetooth starts Check this box to automatically start the File Transfer service every time BlueSoleil™ is started.
IVT BlueSoleil™ User Manual 8 LAN Access 8.1 Introduction The Bluetooth LAN Access Profile (LAP) allows Bluetooth-enabled devices to access the services of a LAN using Point-to-Point Protocol. In this usage model, multiple data terminals use a LAN access point as a wireless connection to a Local Area Network (LAN). Once connected, data terminals operate as if they are connected to the LAN via dial-up networking and can access all the services provided by the LAN.
IVT BlueSoleil™ User Manual Figure 8.1: Right-click My Network Places Figure 8.2: Select Properties on the pop up menu ♦ Click Networking on the Incoming Connections Properties pop-up window. (Figure 8.3) ♦ Choose Internet Protocol (TCP/IP) and click Properties. (Figure 8.4) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 8.3: Incoming Connections Properties Figure 8.4: Choose Internet Protocol (TCP/IP) ♦ Select Specify TCP/IP addresses, and input the two IP addresses. The subnet mask of the two IP addresses should be the same as the subnet of the LAN Computer A belongs to. (Figure 8.5) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 8.5: Input the IP addresses Step 5: Connect to Computer A. 1. Search for Computer A on Computer B. 2. Find the LAP service of Computer A. 3. Right-click the LAP service icon; select Connect on the pop-up menu. (Figure 8.6) Figure 8.6: Select Connect ♦ The Connect BlueSoleil™ LAP Connection window pops up. Input a username and password. (Figure 8.7) ♦ The connection is then established. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Figure 8.7: Input Username and Password Step 6: 8.3 Computer B can now access the LAN via Computer A. Access a LAN via a LAN Access Point This section outlines the steps involved in accessing a LAN through a LAN access point. LAN Access Point A: Computer B Bluetooth access point Notebook/Laptop A Bluetooth Device Windows 2000 IVT BlueSoleil™ Step 1: Connect LAN access point to the Local Area Network. ♦ Set the LAN access point’s name to anything you want.
IVT BlueSoleil™ User Manual Computer B. 3. Right-click the LAP service icon; select Connect on the pop-up menu. ♦ The Connect BlueSoleil™ LAP Connection window pops up. Input username and password. (Figure 8.8) ♦ The connection is now established. (Figure 8.9) Figure 8.8: Input username and password Figure 8.9: Successful connection to the LAN Access Point Step 5: Access other computers in the LAN. ♦ 8.4 Now Computer B can access the LAN via LAN Access Point A.
IVT BlueSoleil™ User Manual See “Section 5.3.1: Check if a Dial-up Adapter is installed”, to check if a Dial up Adapter is installed in your computer. 8.4.1 Check if a Windows Component Direct Cable Connection is installed Step 1: Select Control Panel from the Start | Settings menu, Step 2: Double-click the Add/Remove Programs icon. (Figure 8.10) Figure 8.10: Double-click the Add/Remove Programs icon Step 3: Select the Windows Setup tab in the Add/Remove Programs Properties window. (Figure 8.
IVT BlueSoleil™ User Manual Figure 8.11: Select Windows Setup tab Step 4: Double-click the Communications item in the Windows Setup component list to check the properties. (Figure 8.12) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 8.12: Double-click Communications item Step 5: Check if Direct Cable Connection is selected. If not, select it and click OK to install a Direct Cable Connection. (Figure 8.13) Figure 8.13: Check if Direct Cable Connection is selected Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 8.5 8.5.1 Usage of LAN Access Profile (server side) in Windows98/Me Configure a LAP server in Windows 98/ Me Step 1: Step 2: Start the LAP service. ♦ See “Section 8.2: Access a Local Area Network (LAN)”, Steps 1 to 5. ♦ If this is the first time the service is started n Windows 98/Me, the Direct Cable Connection window pops up. Select Host and click the Next button. (Figure 8.14) Figure 8.
IVT BlueSoleil™ User Manual Figure 8.15: Select Bluelet NULL Modem (Server) Step 4: Click the Finish button. (Figure 8.16) Figure 8.16: Click Finish button. Step 5: Finally, the Direct Cable Connection window pops up. It is now possible to connect to the LAP server. No password is required. Figure 8.17: Connection created Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Note: The above steps are applicable when configuring the LAP server for the first time only. The next time the LAP service is started, the Direct Cable Connection window (Figure 8.17) appears. 8.5.2 Set-up a LAP connection from Windows 2000 to Windows 98/Me Step 1: In the Connect BlueSoleil LAP Connection window click Properties and a window as shown in Figure 8.18 pops up. Figure 8.
IVT BlueSoleil™ User Manual Figure 8.19: Select Advanced (custom settings) Figure 8.20: Advanced Security Settings window Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Step 3: Select Allow older MS-CHAP version for Windows 95 servers and click OK. (Figure 8.21) Figure 8.21: Select Allow older MS-CHAP version for Windows 95 servers Step 4: Select the Yes button. The LAP client in Windows 2000 is now able to connect to the LAP server in Windows 98/Me. (Figure 8.22) Note: The IVT Corporation LAP service does not require a password. Figure 8.22: Click Yes button Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual 9 Object Push 9.1 Introduction The Bluetooth Object Push profile (OPP) is an application that offers a way to send and receive Personal Information Management (PIM) data objects from one Bluetooth-enabled device to or from the other one. The objects Object Push supports the following four formats: ♦ Business cards (*.vcf) ♦ Calendar entries (*.vcs) ♦ Notes (*.vnt) ♦ Messages (*.vmg) The OPP profile can be used in the following scenarios: 9.
IVT BlueSoleil™ User Manual automatically using your computer name. (Figure 9.2) Figure 9.1: Service Configuration Figure 9.2: Open File Step 4: To obtain a VCF card file from MS Outlook. ♦ Open MS Outlook, and select the Contacts item in Outlook Shortcuts. (Figure 9.3) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual Figure 9.3: MS Outlook main window ♦ If there are no contacts entered, the following message appears on the main window “There are no items to show in this view. Double-click here to create a new Contact.” Double-click and a pop-up window appears. (Figure 9.4) Figure 9.4: Create a new contact ♦ Enter your Contact information. Click File | Save as and a Save As window pops up. Select the name of the file and the directory where you want to save the file.
IVT BlueSoleil™ User Manual Figure 9.5: Save new Contact Step 5: Set the T39 to be discoverable. ♦ Step 6: Press the Menu button on the T39 to find the menu list, and then select the Extras item. Press the Yes key to enter the Extras menu, and then select the Bluetooth item. Then select the Discoverable item. Pair with T39 If the pairing succeeds, you will see the services of the T39 include the OPP service. (Figure 9.
IVT BlueSoleil™ User Manual Step 7: To send or get objects data, right-click the OPP service icon. There are four options (Figure 9.7) on the pop-up menu: ♦ Send My Card: Click this menu item, and a business card from Computer A is sent to the T39. ♦ Get Card: Click this menu item to receive a business card from the T39. Open the folder inbox to check if you have received the card. (Note: Open the My Documents folder on the computer and find a new folder called BlueSoleil.
IVT BlueSoleil™ User Manual Computer A: Bluetooth Cellular Phone: IVT BlueSoleil™ Ericsson T39 A Bluetooth Device Step 1: Insert the Bluetooth Device into the computer. Step 2: Start BlueSoleil™ in the computer. Step 3: Step 4: Step 5: ♦ Configure the OPP service attribute of Computer A, and start the OPP service.I ♦ Discover and pair Computer A on the T39. Start the OPP operation. ♦ 9.4 Select Menu | Phone book | Business cards on the T39. ♦ To send “my card” from the T39.
IVT BlueSoleil™ User Manual 9.5 Step 1: Insert Bluetooth Devices in both computers. Step 2: Start BlueSoleil™ in both computers. Step 3: Start the OPP service on Computer B. Step 4: Perform an OPP operation. (See “Section 9.3: Transfer Objects from a Bluetooth Cellular Phone to a Computer”, Step 5) Configure OPP Service In the BlueSoleil™ Service Window, right-click the Object Push icon. To configure ‘my OPP service’, select Properties on the pop-up menu. Figure 9.
IVT BlueSoleil™ User Manual ♦ Receive Business Card There are four possible items here. Each item represents one type of object. You may select the object types that you want to accept. - Accept Business Card to accept business cards (*.vcf) - Accept Calendar Items to accept calendar items (*.vcs) - Accept Email Messages to accept email messages (*.vmg) - Accept Notes to accept notes (*.vnt) 9.6 9.6.
IVT BlueSoleil™ User Manual Figure 9.10: Select the target device and click Push button The operation result will be reported on the dialog. Figure 9.14: Push operation completed Successfully As to other items, for example, note, message and calendar, the steps are the same with ones above. 9.6.3 The usage of OPP-Pull function Click the Pull button from toolbar or File menu then the devices list dialog will appear.
IVT BlueSoleil™ User Manual Figure 9.15: Before Pull only one card named “holk” Figure 9.16: The card named “zerg” is pulled in. If the operation completes successfully the newly pulled card is imported into Outlook. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 10 Synchronization 10.1 Introduction Using Bluetooth Synchronization (SYNC), Bluetooth devices can synchronize messages, notes, calendars and cards with each other. The objects Synchronization (SYNC) supports are: ♦ Business cards (*.vcf) ♦ Calendar entries (*.vcs) ♦ Notes (*.vnt) ♦ Messages (*.vmg) The SYNC application is typically used in the following scenarios: ♦ A computer exchanging PIM (Personal Information Management) data with a cellular phone or PDA.
IVT BlueSoleil™ User Manual 10.3 Set up SYNC Connection between Two Computers This section outlines the steps involved in setting up a SYNC connection between two computers, Computer A and Computer B. Computer A works as a server that provides the BlueSoleil™ SYNC service. Computer B works as a client that uses the SYNC service provided by Computer A.
IVT BlueSoleil™ User Manual Step 4: ♦ Connect to the SYNC service of Computer A. (Figure 10.2) Figure 10.2: Connection is established successfully ♦ The SYNC clients can now start synchronization. Press the green button to begin synchronization. (Figure 10.3) Figure 10.3: Press the green button Advanced Usage: ♦ Before synchronization select the data type that you want to exchange. Leave the checkbox unchecked to disable the object type that you do not support.
IVT BlueSoleil™ User Manual ♦ Open Microsoft Outlook to check the information data that saved in the folder of Contacts(VCARD), Calendar(VCAL), Notes(VNOTE) and Inbox(VMSG) after synchronization. (Figure 10.8) Figure 10.8: Microsoft Outlook 10.4 Synchronization Configuration In the BlueSoleil™ Service Window, right-click the Information Synchronization icon. To configure the synchronization service select Properties on the pop-up menu. (Figure 10.9) Copyright © 2001, IVT Corporation, http://www.
IVT BlueSoleil™ User Manual Figure 10.9: Service Configuration Setting Items: 10.5 ♦ Auto start this service when my Bluetooth starts Check this item to start my synchronization service automatically every time BlueSoleil™ is started. ♦ Options This service supports options for vCard, vCalendar, vMessage and vNote data types. You can select the data type you want to support. Using Synchronization in Outlook After correct installation of BlueSoleil the GUI of Outlook application looks like figure 9.
IVT BlueSoleil™ User Manual Figure 10.10: Select the target device to synchronize with After selecting the target device, the Sync-dialog appears. Figure 10.11: Choose the item type to synchronize Click the Sync button from the toolbar or File menu to start the synchronization process, during and after the synchronization process the current status will be displayed to users. Figure 10.12: The status when operation finished Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Just like the OPP-Pull function, the synchronization’s result will be visible in Outlook application. The following two diagrams show the Note folder before and after the synchronization. Figure 10.13: Before Synchronization Figure 10.14: After Synchronization User can set the most often-used device to default device. From the devices list dialog please choose the right device and then click Set Default button.
IVT BlueSoleil™ User Manual 11 Hardcopy Cable Replacement 11.1 Introduction The Bluetooth Hardcopy Cable Replacement profile (HCRP) provides services to replace the cable between a host and peripheral device with a Bluetooth link. The most common devices using these services are laptops and desktop computers, however other devices are not excluded. The HCRP profile can be used in the following scenario: ♦ Print a document using a Bluetooth Printer. 11.
IVT BlueSoleil™ User Manual several drivers for the Bluetooth printer installed on Computer A, BlueSoleil™ automatically sets one of them as the Bluetooth printer. Figure 11.1: Bluetooth Printer Driver is not installed Figure 11.2: Bluetooth Printer Driver is ready Step 6: Print documents. ♦ Step 7: Computer A and Bluetooth Printer B are now connected. On Computer A, open the document that you want to print. Select File |Print. Then select the Bluetooth printer and print.
IVT BlueSoleil™ User Manual 12 Human Interface Device 12.1 Introduction A typical Bluetooth Human Interface Devices (HID) is a Bluetooth-enabled mouse, keyboard or joystick. The HID service allows wireless communication to Bluetooth HID devices. The HID profile can be used in the following scenarios: ♦ Connecting a computer to a Bluetooth Mouse. ♦ Connecting a computer to a Bluetooth Keyboard. 12.
IVT BlueSoleil™ User Manual Figure 12.1: Find Bluetooth mouse and its service Step 5: 6: Step Double-click the HID service icon to connect to Mouse B. After the connection is successfully set-up, a dashed line appears between the center ball and the Mouse B icon. The HID service icon turns green (错 误!未找到引用源。). Install drivers for Bluetooth mouse. ♦ If this is the first time Computer A has connected to a Bluetooth mouse, wait for a few seconds to allow Windows to install drivers for a Bluetooth mouse.
IVT BlueSoleil™ User Manual Figure 12.2: New HID mouse device in Device Manager 12.3 Connect a Computer to a Bluetooth Keyboard This section outlines how to connect a computer (Computer A) to a keyboard (Bluetooth Keyboard B). Computer A: Bluetooth Keyboard B: Desktop Bluetooth wireless keyboard A Bluetooth Device Windows 2000 IVT BlueSoleil™ Step 1: Insert the Bluetooth Device into the computer.
IVT BlueSoleil™ User Manual Figure 12.3: Connect to Bluetooth keyboard Step 5: Install drivers for the Bluetooth keyboard. ♦ If this is the first time Computer A has connected to a Bluetooth keyboard, wait for a few seconds to allow Windows install drivers for a Bluetooth keyboard. ♦ You will see two new devices in Computer A: Bluetooth HID Keyboard in ‘Human Interface Devices’ class and HID Keyboard Device in ‘Keyboards’ class. (Figure 12.4) Figure 12.
IVT BlueSoleil™ User Manual legacy PS/2 keyboard. Step 7: To disconnect Keyboard B. ♦ Right-click the HID service icon in the Main Window and click Disconnect. Alternatively right-click Keyboard B in the Main Window and select Disconnect | Human Interface Device. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 13 FAX 13.1 Introduction The Bluetooth Fax service allows a Bluetooth-enabled client to send fax messages wirelessly through a fax modem on another Bluetooth device or a cellular phone. The other Bluetooth device or the cellular phone is called the fax gateway (server) as it provides the service to send/receive fax messages.
IVT BlueSoleil™ User Manual And please make sure the bluetooth connection has been set up between the computer and FAX Gateway(refer to Section 12.2). Figure 13.1 Settings in Fax2000 Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 14 Headset 14.1 Introduction The Bluetooth Headset Profile defines the procedures implementing audio wireless transmission on SCO channels. It provides services to replace the cable between an Audio Gateway and Headset with a Bluetooth link. Audio Gateway (AG) – This is the device that is the gateway of the audio, both for input and output. Typical devices acting as Audio Gateways are cellular phones and personal computer.
IVT BlueSoleil™ User Manual Step 5: Step 6: Find the headset service of Headset EL-235 . on Computer A. ♦ Double-click the Headset EL-235 device icon ♦ Enter the Bluetooth passkey (Generally,0000), if necessary, to start authentication. ♦ Once authentication is complete, the Headset service is found. Connect to Headset EL-235.
IVT BlueSoleil™ User Manual 14.3 Using Headset Profile in BlueSoleil 14.3.1 Play music from computer to Headset wirelessly After creating audio connection (for details about how to create an audio connection, please refer to Chapter 14.2), you can play music files using popular music player on Computer A. Open music files (e.g. mp3, WMA, rm etc.) with Winamp or other media player program and play them, the music can be heard on Headset. (Figure 14.3) Figure 14.3 Play Music Files on Computer A 14.3.
IVT BlueSoleil™ User Manual Take NetMeeting as an example. Open NetMeeting Program, select Tools | Audio Tuning Wizard…, click Next, the following dialogoccurs, choose as show in this dialog. Click Next until finishing configuration. (Figure 14.5) Figure 14.5: Audio Tuning Wizard on Computer A Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 15 Advanced Audio Distribution 15.1 Introduction The Bluetooth Advanced Audio Distribution Profile (A2DP) defines the procedures that realize distribution of audio content of high-quality in mono or stereo on ACL channels. It provides services to replace the cable between an Audio Source and Sink with a Bluetooth link. The A2DP profile can be used in the following scenario: ♦ Play music between computer and AV Headphone wirelessly.
IVT BlueSoleil™ User Manual Figure 15.1: Double-click the Computer B device icon Step 6: Connect to AV Headphone B. ♦ Right-click the AV Headphone service icon; select Connect on the pop-up menu. The connection will be established. (Figure 15.2) Figure 15.2: The connection is successfully established Step 7: All the audio media played on Computer A can be heard on AV Headphone B. ♦ Open music files (e.g. mp3, CD, rm etc.
IVT BlueSoleil™ User Manual ♦ When playing VCD or DVD on Computer A, the audio part can be listened on AV Headphone B. Figure 15.3: Play Music Files on Computer A Figure 15.4: Play Music Files on Computer A Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 15.3 Play music between two computers wirelessly This section outlines how to play music from Computer A (Client) and listen to the music on Computer B (Server). Computer A: Computer B: Notebook/Laptop Notebook/Laptop A Bluetooth Device A Bluetooth Device A physical Sound Card Windows 2000 or Windows XP Windows 2000 or Windows XP IVT BlueSoleil™ IVT BlueSoleil™ Step 1: Insert the Bluetooth Device into each computer. Step 2: Start BlueSoleil™ on each computer.
IVT BlueSoleil™ User Manual Figure 15.5: Service Configuration Window Step 5: ♦ In the Playback device field select the device that you want to use. (Figure 15.5) Once the playback device is selected, it will be used until you select another one. ♦ For the first time the AV Headphone service is started, this step is mandatory. Otherwise, if you don’t want to change the layback device, this step can be skipped. Start AV Headphone Service on Computer B.
IVT BlueSoleil™ User Manual Figure 15.6: Main Window Step 7: Search for Computer B on Computer A. ♦ Step 8: Double-click the My Device icon until you find the device Computer B. Find the AV Headphone service on Computer B. ♦ Double-click the Computer B device icon on Computer A. (Figure 15.7) ♦ Enter the Bluetooth passkey (if security is set to High on either side) to start authentication. ♦ Once authentication is complete, the AV Headphone service is found.
IVT BlueSoleil™ User Manual Figure 15.7: Double-click the Computer B device icon Step 9: Step 10: Connect to Computer B. ♦ ; select Connect Right-click the AV Headphone service icon on the pop-up menu. The connection will be established. ♦ If SBC Codec is set with higher priority, SBC Codec will be selected for use. ♦ If mp3 Codec is set with higher priority and there is no professional mp3 Codec installed on Computer A or Computer B. BlueSoleil will select SBC Codec for use.
IVT BlueSoleil™ User Manual 16 Basic Imaging 16.1 Introduction The Bluetooth BIP Profile defines six useful features: Image Push, Image Pull, Advanced Image Printing, Automatic Archive, Remote Camera and Remote Display. BlueSoleil™ support Image Push and Remote Camera now. The BIP profile in BlueSoleil can be used in the following scenario: ♦ Push an image from a digital still camera. ♦ Control a digital still camera remotely.
IVT BlueSoleil™ User Manual Control a digital still camera1 remotely. 16.3 This section outlines how to control a digital still camera B via computer A. Computer A Digital Still Camera B IVT BlueSoleil™ A Bluetooth Device Step 1: Insert the Bluetooth Device into computer A. Step 2: Start BlueSoleil™ on computer A. Step 3: Power on camera B. Step 4: Start remote camera function on camera B. Step 5: Search for camera B on computer A and connect to its BIP service .
IVT BlueSoleil™ User Manual Step 7: Capture pictures: 1. Click “Capture” button on the dialog. BlueSoleil™ triggers the shutter of the camera to capture the image. 2. A “Save As…” dialog pops up to let you select where to save the image. 3. BlueSoleil™ gets the image from camera B. A progress bar in the Bluetooth Camera Controller dialog shows how much the process is finished. (Figure 16.2) 4. When the image is completely downloaded, it is displayed on the computer’s screen. Figure 16.
IVT BlueSoleil™ User Manual 17 Connection Shortcut 17.1 Introduction Connection shortcut profile is used to save time used in searching for devices and browsing services. Once a connection has been established, it can be saved as a shortcut. The shortcut is then used to re-establish the connection, without having to search for the remote Bluetooth device and required Bluetooth service. 17.
IVT BlueSoleil™ User Manual Step 5: In the BlueSoleil™ Main Window, click Tools | My Shortcuts. The Bluetooth Shortcuts window pops up. (Figure 17.2) Figure 17.2: Bluetooth Shortcuts window Step 6: Check the Auto Start box and click Connect. (Figure 17.3) Figure 17.3: Bluetooth Shortcuts Step 7: Once the connection is successfully established, click OK in the Bluetooth Shortcuts window. (Figure 17.4) Copyright © 2001, IVT Corporation, http://www.ivtcorporation.
IVT BlueSoleil™ User Manual Figure 17.4: Click OK on Bluetooth Shortcuts Step 8: Start to use the FTP service provided by Computer A. Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual 18 Bluetooth Glossary Bluetooth Authentication Bluetooth authentication is the procedure to verify whether another Bluetooth enabled device has the right to access your computer. During this procedure, a Bluetooth passkey is requested on both sides of the connection. If the passkeys are the same, the authentication procedure is a success and the connection can be setup. If the passkeys are different, then authentication fails and a connection cannot be established.
IVT BlueSoleil™ User Manual Bluetooth File Transfer This is the implementation of the Bluetooth File Transfer profile (FTP). Bluetooth File Transfer enables the transfer files between Bluetooth devices. Bluetooth HCRP This is the implementation of the Bluetooth Hardcopy Cable Replacement profile (HCRP). HCRP provides services to replace the cables between hosts and peripheral devices with a Bluetooth link. HCRP is mainly used for wireless printing.
IVT BlueSoleil™ User Manual Bluetooth Service Browse A remote Bluetooth device can provide one or more Bluetooth services. To use the services that the remote device provides, the user has to first find the services. This is called service browse. Bluetooth Serial Port This is the implementation of the Bluetooth Serial Port profile (SPP). SPP emulates a serial port over Bluetooth, for the Bluetooth device.
IVT BlueSoleil™ User Manual Piconet A collection of devices connected via Bluetooth wireless technology in an ad hoc fashion. A piconet starts with two connected devices, such as a portable PC and an Access Point, and may expand to eight connected devices. All Bluetooth devices are peer units and have identical implementations. However, when establishing a piconet, one unit will act as a master and the other(s) as slave(s) for the duration of the piconet connection.