User's Manual

 Previously sent business cards -- once a card is selected using the

above option “Always send the same business card” that card

will be added to the shortcut menu as an option.

 Where to store inbound data items, on an individual basis. Options

include (not all options apply to all items):

 Do Not Accept

 Any of the installed PIMs on this computer

 Save to Folder

 The Bluetooth Exchange Folder location—the directory on this

computer where inbound items that are not to be saved in a PIM will be

kept.

 Whether to send/receive attachments with email. Check or clear this

option, when appropriate.

Close a PIM Item Transfer connection

PIM Item Transfer connections close automatically when the data transfer is

complete.

Default Business Card Selection

When the “Always send the same business card” option is selected, a dialog

box appears to allow the selection of a default business card.

The first time the dialog box appears it provides a way to choose the Personal

Information Manager that stores the default business card. Click the

down-arrow in the PIM shortcut menu and select the PIM to be used.

On subsequent appearances of this dialog box, the PIM selection option is not

available.

Change the selected PIM

On the PIM Item Transfer properties page, in the “Received items” section,

there is a Business Cards dropdown list. When a PIM was selected during

initial setup the selected item in this menu was set to the same PIM. To

change the PIM used for the default business card, select a new PIM from the

dropdown list.

Choose a default business card

1. In the Select a Bluetooth Business Card dialog box that appears when

“Always send the same business card” is selected, highlight the card.

2. Click OK to choose a highlighted business card and return to the PIM

Item Transfer Properties page. The chosen contact now appears in, and

is selected in, the “Business card requests” shortcut menu.

If the “Always send the same business card” option is selected again, and a

different contact chosen, the properties page will display both contacts in the

shortcut menu.