Datasheet

Table Of Contents

Inline PoE Tester

TC-NTP1 (v1.0R)

• Comprehensive PoE cable tester for network professionals

• Three testing modes with convenient dip-switch toggle

• Troubleshoot PoE issues in real-time

• For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices

• PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD

• Four digit 7-segment LED display for clear and accurate readings

• User-friendly design with battery-free operation

• Compact and lightweight for on-the-go testing

TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool

accurately tests PoE++, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections,

and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information

such as wattage, voltage, and amperage for that connection.

TC-NTP1

PAGE 1
TC-NTP1 Inline PoE Tester TC-NTP1 (v1.0R) • Comprehensive PoE cable tester for network professionals • Three testing modes with convenient dip-switch toggle • Troubleshoot PoE issues in real-time • For use with IEEE 802.
PAGE 2
TC-NTP1 Testing Modes Step Button Compatibility The TC-NTP1 has three testing functions: Tmode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for nonstandard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts.
PAGE 3
TC-NTP1 FEATURES Ports Testing Modes Step Button Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices.
PAGE 4
TC-NTP1 SPECIFICATIONS Standards • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab • IEEE 802.3af • IEEE 802.3at • IEEE 802.