Datasheet

ManualsBrandsTRENDnet ManualsNetwork EquipmentInline PoE Tester – PoE Cable Tester

1

2

3

Table Of Contents

Testing Modes

The TC-NTP1 has three testing functions: T-

mode (for testing ports on your PSE device to

determine the PoE switch's or injector's PoE

type, and voltage output); N-mode (for non-

standard passive PoE devices); and I-mode

(for PoE inline testing, displaying voltage,

amperage, and wattage of the connected PD).

Step Button

The convenient step button on the PoE cable

tester allows users to cycle through voltage,

amperage, and wattage readouts. It also allows

users to lock the display to a speciﬁc readout

(e.g. wattage) for real-time monitoring.

Compatibility

The PoE cable tester is compatible with IEEE

802.3af/at/bt PoE devices up to 100W, and

non-standard passive PoE devices from 11V –

60V.

NETWORKING SOLUTION

TC-NTP1