Datasheet

Compact Design
Small and compact design of the PoE
cable tester is perfectly pocketable for
on-the-go PoE testing
LED Indicators
LED indicators on the PoE cable tester
convey PoE type (active/passive),
sources, polarity, and power
PoE Support
PoE cable tester supports IEEE
802.3af/at/bt, and non-standard
passive PoE devices
Ports
Equipped with 1 x Gigabit port for PSE
connection, and 1 x Gigabit port for
PD connection
Testing Modes
The TC-NTP1 supports three testing
functions. T-mode allows you to test
your PSE device to determine the PoE
switch's or injector's supported PoE
standards, as well as voltage output.
N-mode is used for non-standard
passive PoE devices. I-mode is used
for PoE inline testing, which displays
the voltage, amperage, and wattage of
the connected PD
Compatibility
Compatible with IEEE 802.3af/at/bt
PoE devices up to 100W, and non-
standard passive PoE devices from
11V – 60V
Toggle Switch
Switch between testing modes using
the convenient toggle switch located at
the bottom of the PoE cable tester
User-Friendly
TC-NTP1 PoE cable tester provides
battery-free operation, and is ready for
use right out of the box; just plug-in to
start testing
Blue LED Display
Convenient front-panel 4-digit seven-
segment LED display on the PoE
cable tester cycles between voltage,
wattage, and amperage readings
Step Button
The convenient step button on the
PoE cable tester allows users to cycle
through voltage, amperage, and
wattage readouts. It also allows users
to lock the display to a specific readout
(e.g. wattage) for real-time monitoring
FEATURES
TC-NTP1