Operation Manual

Step 1: Select your country from the Country list and the ADSL service provider from the ISP List (If there

are more than two ISP in your country) and note the “Encapsulation” type and “VPI & VCI” setting.

Note: Click “CONFIG” if you cannot find your parameters available in the pull down menu. Contact your ISP

for configuration settings.

A. For countries with the following “Encapsulation” type , you will enter into set Username and

Password window as shown below:

; PPPoA VC-Mux

; PPPoA LLC

; PPPoE VC-Mux

; PPPoE LLC

Manually enter your “User Name” and “Password” which will be provided by your Service Provider

(ISP). Click “Save” after setup.