Operation Manual

26
Delete All
Delete all filtering rules from the filter table.
MAC Filtering
The MAC filtering feature allows you to define rules to allow or deny frames through the device based on
source MAC address, destination MAC address, and traffic direction.
Field Description
Outgoing Default
Action
Specify the default action on the LAN to WAN bridging/forwarding path.
Incoming Default
Action
Specify the default action on the WAN to LAN bridging/forwarding path.
Apply Changes
Click to save the setting of default actions to the configuration.
Fields on the second setting block:
Field Description
Rule Action Deny or allow traffic when matching this rule.
Direction Traffic bridging/forwarding direction.
Source MAC Address The source MAC address. It must be xxxxxxxxxxxx format. Blanks can be used in
the MAC address space and are considered as don’t care.
Destination MAC
Address
The destination MAC address. It must be xxxxxxxxxxxx format. Blanks can be used
in the MAC address space and are considered as don’t care.
Add
Click to add the rule entry to the configuration.
Function buttons for the Current Filter Table:
Delete Selected
Delete selected filtering rules from the filter table. You can click the checkbox at the Select column to
select the filtering rule.
Delete All
Delete all filtering rules from the filter table.