Operation Manual

8
WAN
There are three sub-menu for WAN configuration: [Channel Config], [ATM Settings], and [ADSL
Settings].
ADSL router comes with 8 ATM Permanent Virtual Channels (PVCs) at the most. There are mainly three
operations for each of the PVC channels: add, delete and modify. And there are several channel modes to be
selected for each PVC channel. For each of the channel modes, the setting is quite different accordingly.
Please reference following section for details.
Add
Click Add to complete the channel setup and add this PVC channel into configuration.
Modify
Select an existing PVC channel by clicking the radio button at the Select column of the Current ATM VC
Table before we can modify the PVC channel. After selecting an PVC channel, we can modify the channel
configuration at this page. Click Modify to complete the channel modification and apply to the configuration.
Delete
Select an existing PVC channel to be deleted by clicking the radio button at the Select column of the Current
ATM VC Table. Click Delete to delete this PVC channel from configuration.
MAC Address Clone
Select this option if your ISP requires a MAC address to be entered. Enable this option by selecting Enable in
the pull down menu. You can either manually enter the MAC address of click Clone MAC Address to
automatically enter your PC’s MAC address.
Before the TDM-C504 ADSL2/2+ Modem Router will pass any data between the LAN interface(s) and the
WAN interface, the WAN side of the modem must be configured. Depending upon your ADSL service
provider or your ISP, you will need some (or all) of the information outlined below before you can properly
configure the WAN:
 Your ADSL account Username and Password
Channel Config