Operation Manual

DNS

There are two submenus for the DNS Configuration: [DNS Server] and [Dynamic DNS]. This page is used to

select the way to obtain the IP addresses of the DNS servers.

Apply Changes

Set new DNS relay configuration. New parameters will take effect after save into flash memory and reboot the

system. See section “Admin” for save details.

Reset Selected

Discard your changes.

Each time your device connects to the Internet, your ISP assigns a different IP address to your device. In

order for you or other users to access your device from the WAN-side, you need to manually track the IP that

is currently used. The Dynamic DNS feature allows you to register your device with a DNS server and access

your device each time using the same host name. The Dynamic DNS page allows you to enable/disable the

Dynamic DNS feature.

On the Dynamic DNS page, configure the following fields:

Field Description

Enable Check this item to enable this registration account for the DNS server.

DDNS provider There are two DDNS providers to be selected in order to register your device with:

DynDNS and TZO. A charge may occur depends on the service you select.

Hostname Domain name to be registered with the DDNS server.

Username User-name assigned by the DDNS service provider.

Field Description

Attain DNS

Automatically

Select this item if you want to use the DNS servers obtained by the WAN interface

via the auto-configuration mechanism.

Set DNS Manually Select this item to configure up to three DNS IP addresses.

DDNS Server