Operation Manual

27
Delete selected filtering rules from the filter table. You can click the checkbox at the Select column to
select the filtering rule.
Delete All
Delete all filtering rules from the filter table.
Firewall keeps unwanted traffic from the Internet away from your LAN computers. Add a Port
Forwarding entry will create a tunnel through your firewall so that the computers on the Internet can
communicate to one of the computers on your LAN on a single port.
Fields in this page:
Field Description
Port Forwarding Enable/Disable the port-forwarding feature.
Protocol There are 3 options available: TCP, UDP and Both.
Comment Fill in the port forwarding name.
Enable Check this item to enable this entry.
Local IP Address IP address of your local server that will be accessed by Internet.
Local Port The destination port number that is made open for this application on the LAN-side.
Remote IP Address The source IP address from which the incoming traffic is allowed. Leave blank for all.
Public Port The destination port number that is made open for this application on the WAN-side
Interface Select the WAN interface on which the port-forwarding rule is to be applied.
Apply Changes
Click to save the enable/disable the port forwarding to the configuration.
Add
Click to add the rule entry to the configuration.
Function buttons for the Current Port Forwarding Table:
Delete Selected
Delete the selected port forwarding rules from the forwarding table. You can click the checkbox at the Select
Port Forwarding