Operation Manual

40
Apply Changes
Click to save the setting of default actions to the configuration.
Function buttons for this second setting block:
Fields on the second setting block of this page:
Field Description
Outbound Priority The priority level for the traffic that matches this classification rule. The possible
selections are (in the descending priority): p0, p1, p2, p3.
Precedence Select this field to mark the IP precedence bits in the packet that match this
classification rule.
TOS Select this field to mark the IP TOS bits in the packet that match this classification
rule.
802.1p Select this field to mark the 3-bit user-priority field in the 802.1p header of the packet
that match this classification rule. Note that this 802.1p marking is workable on a
given PVC channel only if the VLAN tag is enabled in this PVC channel.
Add
Click to add the rule entry to the configuration.
Function buttons for the IP QoS Rules Table:
Delete Selected
Delete selected IP QoS rules from the table. You can click the checkbox at the Select column to select
the IP QoS rule.
Delete All
Delete all IP QoS rules from the IP QoS Rules table.
The Remote Access function can secure remote host access to your DSL device from LAN and WLAN
interfaces for some services provided by the DSL device.
Fields in this page:
Field Description
Remote Access