Operation Manual

48
− Click the Upload button to start upgrading.
IMPORTANT! Do not turn off your DSL device or press the Reset button while this procedure is in progress.
The Access Control List (ACL) is a list of permissions attached to the DSL device. The list specifies who
is allowed to access this device. If ACL is enabled, all hosts cannot access this device except for the hosts
with IP address in the ACL table.
Fields in this page:
Field Description
ACL Capability Enable/disable the ACL function
Enable Check to enable this ACL entry
Interface Select the interface domain: LAN or WAN
IP Address Enter the IP address that allows access to this device.
Simple Network Timing Protocol (SNTP) is a protocol used to synchronize the system time to the public
SNTP servers. The DSL device supports SNTP client functionality in compliance with IETF RFC2030. SNTP
client functioning in daemon mode which issues sending client requests to the configured SNTP server
addresses periodically can configure the system clock in the DSL device
ACL
Time Zone