-Port Multi-Function USB Print Server TE100-MFP1 ŸQuick Installation Guide (1) V1.0R/11.21.
1. Before You Start Package Contents Ÿ1-Port Multi-Function USB Print Server ŸMulti-Language Quick Installation Guide ŸCD-ROM (Utility and User's Guide) ŸNetwork Cable (1.5 m / 5 ft.) ŸPower Adapter (12V DC, 1A) Minimum Requirements ŸComputer with an Ethernet port and Web browser ŸWired network (e.g.
2. Installation 1. Connect the print server to one of the ports on your wired network with the provided network cable. 2. Plug in the power adapter and move the power switch to the “On” position. ON/OFF WAN Internet 3. Connect your printer to the USB port on the print server. 4. Power on the printer. 5. Verify that the status LED indicators on the front of the print server to confirm that the device is active and communicating with your printer (Power, LINK, and USB port are solid green).
6. Install the Control Center utility for each computer that requires access to the print server by inserting the Utility CD on each computer. 7. Follow the InstallShield Wizard instructions. Then click Finish. 11. To save time and avoid manually connecting for every print request, select your printer and click Auto Connect Printer. 8. Open utility by double clicking on the TRENDnet USB Control Center Utility icon. Note: Please refer to the user's guide for advanced network setting instructions.
TRENDnet 20675 Manhattan Place Torrance, CA 90501. USA Copyright ©2012. All Rights Reserved. TRENDnet.
