User's Guide
Table Of Contents
- Web Smart Switch Series Product Overview
- Switch Installation
- Accessing switch management interfaces
- System
- Network
- QoS (Quality of Service)
- Security
- Tools
- Using the Web Smart Switch Management Utility
- Hardware Features and Specifications
- Web Smart Switch Series Software & Technical Specifications
- Quick Installation GuideTroubleshooting
- Appendix
© Copyright 2018 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
Web Smart Switch Series
Connect additional devices to your switch
You can connect computers or other network devices to your switch using Ethernet cables to connect them to one of the available Gigabit Ethernet Ports, Gigabit Ethernet PoE Ports,
Gigabit Ethernet PoE+ Ports, Gigabit Ethernet UPoE Ports, or SFP Ports. Check the status of the LED indicators on the front panel of your switch to ensure the physical cable connection
from your computer or device. You can use either the Gigabit Ethernet ports or SFP connections as network uplinks. (SFP modules sold separately)
Note: If you encounter issues connecting to your network, there may be a problem with your computer or device network settings. Please ensure that your computer or device network
settings (also called TCP/IP settings) are configured properly within the network subnet your switch is connected.
Note: Your switch model may be different than the one shown in the example illustrations.