User's Guide

TRENDnet User’s Guide

Web Smart Switch Series

Accessing switch management interfaces

Access your switch management page

Note: Your switch default management IP address http://192.168.10.200 is accessed

through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®,

Chrome™, Safari®, Opera™) and will be referenced frequently in this User’s Guide.

Throughout this user’s guide, the term Web Configuration will be used to reference

access from web management page.

1. Open your web browser and go to its IP address (default: http://192.168.10.200).

Your switch will prompt you for a user name and password.

2. Enter the user name and password. By default:

User Name: admin

Password: admin

Note: User Name and Password are case sensitive.

Dashboard

View your switch status information

Dashboard

You may want to check the general system information of your switch such as firmware

version, boot loader information and system uptime. Other information includes H/W

version, RAM/Flash size, administration information, IPv4 and IPv6 information.

1. Log into your switch management page (see “Access your switch management page”

on page 5).

2. Click on Dashboard.

Switch Information

• System Uptime – The duration your switch has been running continuously

without a restart/power cycle (hard or soft reboot) or reset.

• Runtime Image: The current software or firmware version your switch is running.

• Boot Loader – The current boot loader version your switch is running.

Hardware Information

• DRAM Size: Displays your switch RAM memory size.

• Flash Size: Displays your switch Flash memory size.