User`s guide

TRENDnet User’s Guide TEG-082WS

PING Test Settings

Destination IP

Address:

The IP address of the node you want to ping in

the IPv4 or IPv6 format.

Timeout Value:

Specifies the length of time, in seconds, the

switch waits for a response before assuming

that a ping has failed.

Number of Pings:

Requests

Specifies the number of ping requests you want

the switch to perform.

Click Start to start the network connectivity ping test. After the ping test, click

Show Ping Results to check the ping test result.

Save Settings to Flash

Click Save Settings to Flash button to save the change on the flash to make

sure the change is permanent.