User`s guide

TRENDnet User’s Guide TEG-082WS

Go Save Settings to Flash section to save the change on the flash to make

sure the change is permanent.

Trunk Configuration (Link Aggregation)

Configure port trunk settings

Bridge > Trunk Config > Trunking

The trunking function enables the cascading of two or more ports for a

combined larger total bandwidth. Up to 4 trunk groups may be created, each

supporting up to 8 ports. Add a trunking Name and select the ports to be

trunked together, and click Apply to activate the selected trunking groups.

Important Note: Do not connect the cables of a port trunk to the ports on the switch

until you have configured the ports on both the switch and the end nodes. Connecting

the cables prior to configuring the ports can create loops in your network topology.

Loops can result in broadcast storms which can severely limited the effective

bandwidth of your network.