User`s guide

TRENDnet User’s Guide TEG-082WS
© Copyright 2014 TRENDnet. All Rights Reserved. 41
Check the static router ports to add and click Apply to save the settings.
Note: You can click on All to add all ports. Clicking Restore will restore the static router
port settings to default.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
Bandwidth Control
Configure Storm Control
Bridge > Bandwidth Control > Storm Control
This section allows you to configure the DLF (Destination Lookup Failure),
broadcast, and multicast storm settings for each switch port.
Storm Control Settings
Port:
The port ID you want to implement the storm control.
DLF:
Destination Lookup Failure: Click the drop-down list
and select Enabled to enable DLF storm control.
Broadcast:
Click the drop-down list and select Enabled to enable
broadcast storm control.