User`s guide

TRENDnet User’s Guide TEG-082WS
© Copyright 2014 TRENDnet. All Rights Reserved. 48
To configure Private VLAN Settings, perform the following procedure:
 Change the Private VLAN Settings by clicking the State radio button
choices that you want to change.
o Enable: Enable Private VLAN settings.
o Disable: Disable Private VLAN settings.
Press Apply to make the changes to take effect.
 Set the Source Port to on port 1 – 8.
 Click on the Forwarding Ports ratio button that applies to your
configuration.
 Click Apply.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.