User`s guide

TRENDnet User’s Guide TEG-082WS
© Copyright 2014 TRENDnet. All Rights Reserved. 58
Configure the SNMP Group Access Table
SNMP > Group Access Table
The SNMP View Names are defined in the SNMP Group Access Table and are
based on the User and Group Names.
To create SNMP View Names:
Before you can create an SNMP View name, you must define a Group Name
using the SNMP User/Group page.
 Enter the Group Name. This entry must be pre-defined on the SNMP
User/Group page.
 Enter the Read View Name. This name is an optional field. It can be
up to 31 characters in length.
 Enter the Write View Name. This name is an optional field. It can be
up to 31 characters in length.
 Enter the Notify View Name. This name is an optional field. It can be
up to 31 characters in length.
 From the Security Model pull-down menu, select v3.
 Enter the Security Level from the pull-down menu. The selection
options are:
o NoAuthNoPriv: This selection is the appropriate selection
when no Auth-Protocol or Priv-Protocol (no encryption) are
selected on the SNMP User/Group page.
o AuthNoPriv: Choose this selection when encryption has been
enabled but only the Auth-Protocol has a password assigned
and the Priv-Protocol has been selected as none on the
SNMP User/Group page.
o AuthPriv: When the Auth-Protocol or Priv-Protocol have
been enabled, choose this selection.
 Click the Add button.