User`s guide

TRENDnet User’s Guide TEG-082WS

Rack Mount Hardware Installation

The switch can be mounted in an EIA standard-size, 19-inch rack, which can

be placed in a wiring closet with other equipment. Attach the mounting

brackets at the switch’s front panel (one on each side), and secure them with

the provided screws.

Note: The switch model may be different than the one shown in the example

illustrations.

Then, use screws provided with the equipment rack to mount each switch in

the rack.

Basic Installation

1. Power on your TEG-082WS and connect your computer to the switch.

2. Assign a static IP address to your computer’s network adapter in the

subnet of 192.168.10.x (e.g. 192.168.10.25) and a subnet mask of

255.255.255.0.