User`s guide

TRENDnet User’s Guide TEG-082WS

Configure Voice VLAN OUI settings

Voice VLAN > Voice VLAN OUI Settings

Use the following procedure to configure Voice VLAN OUIs:

• Enter a text description that helps you identify the manufacturer’s

OUI in the User Defined OUI. Description field. This parameter can

be up to 20 characters in length.

• Enter the MAC address in the User Defined OUI. Telephony OUI field

of one of the IP phones with the manufacturer's OUI.

• Click Add. The new OUI entry is displayed in the table at the bottom

of the page.

Note: If you find more than one OUI among the IP phones you are installing, enter one

MAC address that represents each individual OUI. You can enter a total of 10 OUIs.

Modify OUI Setting

To modify or delete an OUI, it must be first be deleted and then re-created.

Delete OUI Setting

To delete a specific OUI that had already been entered in the table at the

bottom of the page, click on Delete in the Action column of the table. The

specific OUI will be deleted from the table.

Go Save Settings to Flash section to save the change on the flash to make

sure the change is permanent.