User`s guide

TRENDnet User’s Guide TEG-082WS
© Copyright 2014 TRENDnet. All Rights Reserved. 94
View Error Information Statistics
Statistic > Error Information
Error Information
Port ID:
The port ID on the switch
InErrors:
Inbound Errors (Pkts), number of inbound errors in
packets per second.
OutErrors:
Outbound Errors (Pkts), number of outbound error
packets.
DropEvents:
Drop Events, number of packets dropped.
CRCAlignErrors:
CRC and Align Errors, number of CRC and Align errors
that have occurred.
UndersizePkts:
Undersize Packets (Pkts), number of undersized
packets (less than 64 octets) received.
OversizePkts:
Oversize Packets (Pkts), number of oversized packets
(over 2000 octets) received.
Fragments:
Number of fragments (packets with less than 64
octets, excluding framing bits, but including FCS
octets) received.
Collisions:
Number of collisions received. If Jumbo Frames are
enabled, the threshold of Jabber Frames is raised to
the maximum size of Jumbo Frames.
Switch Maintenance
Upgrade your switch firmware
Tools > Firmware Upgrade
TRENDnet may periodically release firmware upgrades that may add features
or fix problems associated with your TRENDnet switch model and version. To
check if there is a firmware upgrade available for your device, please check
your TRENDnet model and version using the link.
http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer
than the one your switch is currently running. To identify the firmware that is
currently loaded on your switch, log in to the switch, click on the System Info
section or click on Tools and click on Firmware Upgrade. The firmware used
by the switch is listed as Runtime Image or Image Version. If there is a newer
version available, also review the release notes to check if there were any
new features you may want or if any problems were fixed that you may have
been experiencing.
1. If a firmware upgrade is available, download the firmware to your
computer.
2. Unzip the file to a folder on your computer.
Please note the following:
• Do not interrupt the firmware upgrade process. Do not turn off the
device or press the Reset button during the upgrade.
• If you are upgrade the firmware using a laptop computer, ensure that
the laptop is connected to a power source or ensure that the battery
is fully charged.