Wireless Access Point User's Guide

Please remember that TRENDware wireless devices are pre-configured to connect

together, right out of the box, with the default settings.

You will need a broadband Internet access (Cable/DSL)

subscription.

Consult with your Cable/DSL provider for proper installation of the

modem.

Configure TEW-310APB. Refer to the Quick Installation Guide for

setting up the Access Point.

If you already have a DHCP server (e.g. Internet Router) on the

network, please disable the DHCP Server function on the TEW-310APB.

If you are connecting a desktop computer in your network, you

can install the TRENDnet TEW-303PI wireless PCI adapter into

an available PCI slot. See the Quick Installation Guide included

with the TEW-303PI

If you are connecting a Notebook computer in the network, install

the drivers for the TEW-301PC wireless CardBus adapter into the

laptop computer. See the Quick Installation Guide included with

TEW-301PI for installation instructions.

After the configuration, connect the Access Point to your network.

If you have an Internet Router, connect it to the cable/DSL

Note:

Please refer to the following sections

of this manual for additional

information about setting up a

network:

Networking Basics- learn how to

check your IP Address; share printers

and files.

Using the Configuration Utility-

learn the settings you must use on

each computer in your network for

successful communication.

Troubleshooting learn how to check

for the proper installation of the

network adapters' drivers and other

tips for troubleshooting the network.

Setting Up an Infrastructure Network

Fig. 4.1