Wireless Access Point User's Guide

Security
Password: Change the login User
Name and Password in this screen.
Administrator ID: This is the login
User Name for the browser
configuration. Default is admin, you
can enter a name with up to 15
characters.
AP Password New: Enter the new
password (up to 15 characters).
Confirm: Enter the new password again.
Click Apply to save the new User Name and Password.
Click Cancel to discard the changes.
MAC Filter: Use MAC Filters to allow or deny wireless connection to the
TEW-310APB. Select Enable to activate the filter, select Disable (default)
to disable this feature.
Select Only deny PCs with the MAC listed below to access the device
or select Only allow PCs with the MAC listed below to access the
device and enter the MAC Address of the selected computers into the
fields below.
You could enter up to 50 MAC address entries, but only 10 entries are
displayed. Please click on the 1~10 pull-down arrow and select the next 10
entries (21~30, 31~40, and 41~50).
Click Apply to save the settings.
Click Cancel to discard the changes.
802.1X
802.1X Authentication protocol. This protocol is not available with the first
released firmware. Please check TRENDware web site
(www.trendware.com) for updated firmware that supports 802.1X protocol.
18
Fig. 5.7