Wireless Access Point User's Guide

2. The wireless client cannot access the Internet in the

Infrastructure mode.

· Make sure the wireless client is associated and joined with the correct

Access Point. To check this connection: Right-click on the Local

Area Connection icon in the taskbar> select View Available Wireless

Networks. The Connect to Wireless Network screen will appear.

Please make sure you have selected the correct available network, as

shown in the illustrations below.

You could also check the associated Access Point by using your

Wireless Adapter's Utility program.

· Check that the IP Address assigned to the wireless adapter is within

the same IP Address range as the access point and gateway. Since

the TEW-310APB has an IP Address of 192.168.1.1, wireless

adapters must have an IP Address in the same range, e.g.,

192.168.1.x. Each device must have a unique IP Address; no two

devices may have the same IP Address. The subnet mask must be the

same for all the computers on the network.) To check the IP Address

assigned to the wireless adapter, double-click on the Local Area

Connection icon in the taskbar > select the Support tab and the IP

Address will be displayed. (Please refer to Checking the IP Address

in the Networking Basics section of this manual.)

· If it is necessary to assign a Static IP Address to the wireless adapter,

please refer to the appropriate section in Networking Basics. If you are

entering a DNS Server address you must also enter the Default

Gateway Address.

Fig. 6.2