Wireless Access Point User's Guide

4. Resetting the TEW-310APB to Factory Default Settings

After you have tried other methods for troubleshooting your network, you

may choose to Reset the TEW-310APB to the factory default settings.

Remember that TRENDnet wireless products network together, out of the

box, at the factory default settings.

To hard-reset the TRENDnet TEW-310APB to Factory Default Settings,

please do the following:

· Locate the Reset button on the back of the TEW-310APB (next to the

Ethernet port).

· Use a paper clip to press the Reset button.

· Hold for about 5 seconds and then release

· After the TEW-310APB reboots (this may take a minute) it will be

reset to the factory Default settings.