Wireless Access Point User's Guide

Assigning a Static IP Address
Note: Residential Gateways/Internet Routers will automatically assign IP
Addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable
Gateway/Router you will not need to assign Static IP Addresses, however, you
need to set the TCP/IP protocol to automatically obtain IP.
F you are not using a DHCP capable Gateway/Router, or you need to
assign a Static IP Address, please follow these instructions:
· Go to Start
· Double-click on
Control Panel
· Double-click on
Network Connections
35
Fig. 7.21
Fig. 7.22