Wireless Access Point User's Guide

Connecting to a Wireless Network with a Wireless Router or

Access Point using a static IP address in Windows Me or

Windows 98.

· Select Specify an IP address.

· Input a static IP address within

the same IP Address range as

the wireless router or access

point.

· IP address: 192.168.0.51

· Subnet mask: 255.255.255.0

· Default Gateway: Enter the

LAN IP address of the

Wireless Router

· Select Detect connection to

network media.

Checking the Wireless Connection by Pinging

· Go to Start > Run > type

cmd. A window similar to

Fig. 7.35 will appear.

· Type ping xxx.xxx.xxx.xxx

and hit Enter, where xxx is

the IP address of the

Wireless Router or Access

Point.

· A good wireless connection

will show four replies from the

wireless router or access

point, as shown.

· Click OK

For Windows XP and 2000:

Fig. 7.34

Fig. 7.35