Network Router User Manual

IP Filters:

This screen enables you to define a minimum and maximum IP address range filter; all

IP addresses falling in the range are not allowed Internet access. The IP filter profiles

are listed in the table at the bottom of the page. (Note: Click anywhere in the item. Once

the line is selected, the fields automatically load the item's parameters, which you can

edit.)

Enable: Click to enable or disable the IP address filter.

Range Start: Type the minimum address for the IP range. IP addresses falling between

this value and the Range End are not allowed to access the Internet.

Range End: Type the minimum address for the IP range. IP addresses falling between

this value and the Range Start are not allowed to access the Internet.

Add: Click to add the IP range to the table at the bottom of the screen.

Update: Click to update information for the range if you have selected a list item and

have made changes.

Delete: Select a list item and click Delete to remove the item from the list.

New: Click New to erase all fields and enter new information.