ol 1. Before You Start Package Contestants +TEW-638APB *Quick Installation Guide «CD-ROM (Utility and User's Guide) «Po wet Adapter (12¥ DC, 0.54) «Network Cable (0.6m / 21t} Minimum Requirements =Web Browser: Interment Explorer (6 or higher), Firefox 2.
2. Hardware installation Nita: You can also download the utility at § 1. Locates an optimum location for the Access Point. The best place for the Access Point Is usually at the canter of your wireless network. 2. Disable any anti-virus and firewall programs before starting hardware installation. For Windows Users 1. Insert Futility CD-ROM inch your computer's CD-ROM drive. 2. Click Run Sextuplet. (Windows distaff only) 3. Click Setup Wizard. 4.
ol 5. Connect the provided network cable from 2 LAN port on your Router to the LAN port on the TEW-838APB. Then click Next. 6. Connect a network cable from a LAN port on your Router to the Theme port on your computer. 7. Connect the Power Adapter to the Access Point and then 1o a power cutie. Then slick Next. Select the TEW-638APB from the list and then click Configure. i T Configure 8. Enter a password and then slick Login. The default password |s admin.
10. Select Access Point and then click Next. Note: For AP Clinton setup, please refer to the User's Glued for step by step Instructions. The User's Guide can be found on this product's CD-ROM.
13. Enter a SAID and then click Next. By default, the SAID is Trendsetter. Enter a SAID (Wireless Network Nam) and then click Next. By default, the SAID ls Trendsetter. The SAID Is the ‘wireless network name of your wireless network {e.g. wireless router of access airport. Enter a unique SAID. Choose something that you would easily Identify when searching for available Wirelesses networks. ol L 14, Select the desired Wireless Mods and then click Next. 15. Select a Security Mode and then click Next.
Note: 1. To protect your network from any unauthorized access it is recommended to enable ‘wireless encryption. 2.The example below s for WPA2-PSK (AES) sacristy. Hf you select W PA-PSK or WPA2-PSK, make ‘sure your wireless adapters support WPA or PAWPAW, If your wireless adapters do not support WPA or PAWPAW, then select WEP. 3. WEP encryption only supports 802.11bvg sped of up to 54Mbps.
21. Click Yes to exit, Bt aitch cenobite Wit 22. Connect the tidbit detachable antennas to the TEW-638APB. M Note: To connect a wireless computer to the TEW-B38APB, please refer to the first question in the troubleshooting section.
