Quick Installation Guide TEW-654TR 1.
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. Hardware Installation ......................................................................... 3. Configure the TEW-654TR ................................................................ 1 1 3 5 Troubleshooting ................................................
1. Before You Start Package Contents TEW-654TR ? CD-ROM (User’s Guide) ? Multi-Language Quick Installation ? Guide Travel case ? USB to power-pin cable ? (0.45m/2.5ft.) Cat. 5 Ethernet cable (1.1m/3.6ft.) ? Power adapter (5V, 1.2A) ? Installation Requirements ? A computer with a wireless network adapter properly installed ? Web Browser: Internet Explorer (6.
Application Router Mode Internet 300Mbps Wireless N Travel Router Kit Laptop with Wireless N USB Adapter (TEW-624UB) Laptop with Wireless N USB Adapter (TEW-644UB) (TEW-654TR) AP Mode Laptops with Wireless N USB Adapters (TEW-644UB) Internet Modem Router 300Mbps Wireless N Travel Router Kit (TEW-654TR) AP Client Mode 300Mbps Wireless N Travel Router Kit (TEW-654TR) Internet Laptop with Wireless N USB Adapter (TEW-624UB) 300Mbps Wireless N ADSL2/2+ Modem Router (TEW-635BRM) 2 English
2. Hardware Installation Note: 1. Gather all information related to your Internet Connection before you start. If necessary, contact your Internet Service Provider (ISP). 2. The below steps is for router mode configuration. For AP and client mode instructions, please refer to the User's Guide. 1. Verify that you have an Internet connection when connecting your computer directly to the Cable or DSL modem or Ethernet jack. Open your browser (e.g. Internet Explorer) and type in a URL (e.g.) in the address bar.
4. Connect the AC Power Adapter to the wireless router and then to a power outlet. 5. Verify that the following panel lights are on: POWER, LAN and WLAN. 6. Press the WPS button on the TEW-654TR for 5 seconds, then let go. The WLAN LED will be blinking amber. 7. Follow the WPS push button setup instructions for your Wireless Adapter's configuration utility to connect to the TEW-654TR.
3. Configure the TEW-654TR 1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter. 2. Enter the User Name and Password, and then click Log In. By default: User Name: admin Password: admin 3. Click Wizard. 4. Click Next.
5. Enter a Password, verify the Password and then click Next. By default, the Password is admin. 6. Select your Time Zone and then click Next. 7. Click Next. Note: Do not change default settings unless it is conflicting with your existing hardware.
8. Configure the settings based on information provided by your ISP. Follow the wizard instructions to complete the configuration. Note: Each Internet Connection type may have different options. 9. Enter the desired SSID and then click Next. 10. Click Save.
11. Click Restart. 12. Wait around 60 seconds while the router reboots. 13. Open up your browser and enter in a URL (e.g. www.trendnet.com) to verify that you have Internet connection. Your configuration is now complete. For detailed information regarding the TEW-654TR’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.
Troubleshooting Q1: I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW654TR's web configuration page? A1: First, check your hardware settings again by following the instructions in Section 2. Second, make sure the LAN and WLAN lights are lit. Third, make sure your TCP/IP settings are set to the following: Windows Vista 1.
2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically. Fourth, press on the factory reset button for 15 seconds. Note: If you are trying to configure the TEW-654TR in AP or AP Client mode, see Q6. Q2: I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out? A2: Contact your Internet Service Provider's (ISP) support service for the correct information.
Q6: How do I configure AP or AP Client mode on the TEW-654TR? A6: First, you need to assign a static IP address to your computer's network adapter in the 192.168.10.X subnet. Since the TEW-654TR's default IP address is 192.168.10.100 in AP and AP Client mode when no DHCP server is connected, do not assign an IP address of 192.168.10.100 to your computer's network adapter. See the instructions below: Windows Vista 1.
2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.10.x. Second, change the hardware switch on the bottom of the TEW-654TR to AP or Client. Third, connect the provided Ethernet cable from the Ethernet port on your computer to the Ethernet port on the TEW-654TR.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2009. All Rights Reserved. TRENDnet.
