Table of Contents Product Overview ................................................................................................................................6 Features ...........................................................................................................................................6 Package Contents ............................................................................................................................6 Hardware Overview ....................................
Wireless Settings................................................................................................................................29 Basic Setting ...................................................................................................................................29 Security Setting ..............................................................................................................................30 WEP ..................................................................
Firewall...............................................................................................................................................50 MAC Filter ......................................................................................................................................50 IP Filter ...........................................................................................................................................50 URL Filter................................................
TR069 Settings ...............................................................................................................................73 TR069 CA IMPORT..........................................................................................................................74 Init Script ............................................................................................................................................74 SysLog .................................................................
Product Overview Thank you for choosing Trendnet Wireless N ADSL2 Modem Router. This Modem Router combines the functionality of an ADSL modem and Internet gateway in one. It allows you to access the Internet and share resources such as printers, scanners, and files, via a wireless connection or through one of the Ethernet ports. The various security features, such as WPS, WPA2, SPI, and NAT, protect your data and privacy online. The web-based utility allows you to configure your Modem Router easily.
Hardware Overview Front Panel No. LED 1 Power LED Description • • • 2 LAN 1, 2, 3, 4 • • • 3 Wireless • • • • 4 WPS • • • 5 DSL • • • • 6 Internet • • • Solid GREEN – Indicates normal operation. Solid RED – Indicates malfunction. Off – The device is powered off. Solid GREEN – Connected but no activity. Flashing GREEN – Data transmission is in progress. Off – No computer is connected. Solid GREEN – Connected but no activity. Flashing GREEN – Data transmission is in progress.
Rear Panel No. Ports / Buttons Description 1 DSL port Connects to the DSL line using the RJ-11 cable. 2 WPS button Press to search for devices that support Wi-Fi Protected Setup (WPS). 3 Reset button Press and hold this button for 15 seconds to restore your device to its original factory default setting. 4 Ethernet port Connects a computer and other Ethernet network devices to the Modem Router using RJ-45 cables. 1, 2, 3, 4 5 Power port Connects the power adapter.
Wireless Performance Considerations There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them.
Installation Make sure that all devices are powered off before starting installation. Installation Diagram Connect the Power 1. Connect the power adapter to the power port of your Modem Router. 2. Plug the power adapter to a wall outlet or a power strip. NOTE: • • Use only the supplied power adapter. Using other power adapters may cause damage to the device. Connect all devices to your Modem Router before connecting the power adapter to a wall outlet. Connect the Computer Wired Connection 3.
Repeat the above steps to connect other computers to the Modem Router via Ethernet connection. To connect more than four computers, use a hub or switch. Connect one end of an RJ-45 cable to the hub or switch and the other end to the computer. Connect the DSL 5. Connect one end of the RJ-11 cable to the DSL port of your Modem Router. 6. Connect the other end of the RJ-11 cable to a wall jack with DSL service.
Configure the Computer This section will guide you on how to configure your computer according to the operating system you are using. • • • • • Windows 95 / 98 / ME, see below. Windows 2000, see page 13. Windows XP, see page 13. Windows Vista, see page 14. Windows 7, see page 14. Windows 95 / 98 / ME If you are using Windows 95 / 98 / ME operating system, follow the instructions below to configure your computer. 1. On the desktop, right-click Network Neighborhood. 2. Click Properties. 3.
Windows 2000 If you are using Windows 2000, follow the instructions below to configure your computer. 1. Click Start > Settings > Control Panel > Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. Click Properties. 4. On the network components list, make sure that Internet Protocol (TCP/IP) is checked. If not, check it to enable the Properties button. 5. Select Internet Protocol (TCP/IP), and then click Properties. 6.
Windows Vista If you are using Windows Vista, follow the instructions below to configure your computer. 1. Click Start > Control Panel > Network and Internet Connections > Network Connections. 2. Right-click Local Area Connection, then click Properties. 3. On the General tab, make sure that Internet Protocol (TCP/IP) is checked. If not, check it to enable the Properties button. 4. Select Internet Protocol (TCP/IP), and then click Properties. 5.
Log In to the Modem Router Use the web-based utility to configure your Modem Router. Note the following default settings before accessing the web-based utility. SSID TRENDnet658 Channel Auto 802.11 Mode 802.11 b+g+n mixed mode Security Disable IP Address 192.168.10.1 VPI/VCI for ATM 8/35 DSL Line Mode Auto-detect TCP/IP Address 192.168.10.x (where x is a number between 2 and 254) (PC) Default IP Address 192.168.10.1 (Modem Router) Subnet Mask 255.255.255.
Setup Wizard After you log in, the Setup Wizard appears on the screen. It is recommended to follow the wizard if are setting up the network and configuring the Modem Router for the first time. 1. Select a PVC (Permanent Virtual Circuit), then click Next. It is recommended to use the default setting, PVC0, when setting up the Modem Router for the first time. 2. The information required on the page below can be obtained from your Internet service provider (ISP). Consult your ISP and do the following: a.
3. Select a network protocol. Click Next to continue. The information required on the next page vary depending on the network protocol you selected here. 4. The following is a PPPoE example. a. Enter the connection Name, User Name, and User Password. Re-type the password in the Confirm Password field. b. Select whether to enable or disable features such as NAT (Network Address Translation), DNS (Domain Name System), and DNS Override. c. Leave the remaining fields to their default settings. d.
5. Select whether to enable or disable wireless connection. From this point, you can also change the SSID with a name that you can easily remember. Click Next to continue. 6. Select the Security Mode, Authentication Type, and Encryption, and enter a passkey. Click Next to continue. The screen below varies depending on the security mode you selected, below is an example of a WEP security screen. 7. When prompted to reboot, click OK. 8.
Menu Use the main menu, located on the left panel of the screen, to manually configure your Modem Router. Click a menu item, then a submenu to display the page on the screen. For submenus with more options, move the mouse cursor over the submenu to view the options. Setup The Setup menu allows you to configure the Internet connection of your Modem Router manually. Internet Setup The Internet Setup page is divided into three sections: Internet Connection Settings, Internet Settings, and Protocol.
provided by your ISP. The default VPI is 8. VCI — Enter the Virtual Channel Identifier (VCI)) setting provided by your ISP. The default VCI is 36. Encapsulation — Select LLC (Logical Link Control) or VCMUX (Virtual Circuit Multiplexing), according to your ISP. ATMQoS — Select the type of ATM Queue of Service (ATMQoS) specified by your ISP. Options are: UBR (Unspecified Bit Rate), CBR (Constant Bit Rate), VBR-nrt (Variable Bit Rate non-real-time), and VBR-rt (Variable Bit Rate real-time).
Protocol This section varies depending on the selected network protocol. PPPoE (RFC-2516 PPP over Ethernet) If you select PPPoE (Point-to-Point Protocol over Ethernet), the screen below is displayed. State of Connection — Select whether to enable or disable this connection. IPMode of Connection — Select the connection mode, options are: • • Dynamic: Select Dynamic if the IP address can be automatically obtained from your ISP.
User Password — Enter the password provided by your ISP. Re-enter the password in the Confirm Password field. Max MRU — This is the maximum rate of cells that you can receive. If provided by your ISP, enter the rate in the field. Otherwise, leave this field to its default setting. DNS Enabled — Select whether to enable or disable DNS (Domain Name System). DNS Override Allowed — Select whether to enable or disable DNS override. DNS Server 1 and DNS Server 2 — If provided by your ISP, enter the DNS server.
PPPoA (RFC-2364 PPP over ATM) If you select PPPoA (Point-to-Point Protocol over ATM), the screen below is displayed. State of Connection — Select whether to enable or disable this connection. IPMode of Connection — Select the connection mode, options are: • • Dynamic: Select Dynamic if the IP address can be automatically obtained from your ISP. Static: Select Static if you are required to use a permanent IP address to connect to the Internet.
DNS Server 1 and DNS Server 2 — If provided by your ISP, enter the DNS server. Otherwise, leave these fields blank. Connection Trigger — You can configure how you want your Modem Router to connect and terminate the Internet connection. Options are: • • • OnDemand: Enables the Modem Router to cut off the Internet connection after being idle for a specified period of time. The Modem Router automatically re-establishes the connection when you try to access the Internet again.
State of Connection — Select whether to enable or disable this connection. Name — Enter your desired connection name. NAT — Select whether to enable or disable NAT (Network Address Translation). Enable this setting to share one WAN IP address with multiple computers on your network. External IP Address — Enter the IP address provided by your ISP. Subnet Mask — Enter the subnet mask provided by your ISP. Default Gateway — Enter the default gateway provided by your ISP.
State of Connection — Select whether to enable or disable this connection. Name — Enter your desired connection name. NAT — Select whether to enable or disable NAT (Network Address Translation). Enable this setting to share one WAN IP address with multiple computers on your network. DNS Enabled — Select whether to enable or disable DNS (Domain Name System). DNS Override Allowed — Select whether to enable or disable DNS override. DNS Server 1 and DNS Server 2 — If provided by your ISP, enter the DNS server.
Static IP Address If you select Static IP Address, the screen below is displayed. State of Connection — Select whether to enable or disable this connection. Name — Enter your desired connection name. NAT — Select whether to enable or disable NAT (Network Address Translation). Enable this setting to share one WAN IP address with multiple computers on your network. External IP Address — Enter the IP address provided by your ISP. Subnet Mask — Enter the subnet mask provided by your ISP.
Bridge Mode If you select Bridge mode (RFC-1483 Bridged), the screen below is displayed. State of Connection — Select whether to enable or disable this connection. Name — Enter your desired connection name. CIP (RFC-1577) If you select CIP (RFC-1577 Classic RP/ARP over ATM), the screen below is displayed. State of Connection — Select whether to enable or disable this connection. Name — Enter your desired connection name. NAT — Select whether to enable or disable NAT (Network Address Translation).
ICMP Reply Enable — Check this box to enable ICMP (Internet Control Message Protocol) messages to be sent back to the host that sent the message. Proxy ARP Enable — Check this box to enable proxy ARP function. Click the Apply button to save your changes or click the Cancel button to discard your changes. Wireless Settings The Wireless Settings page allows you to enable and configure wireless connections.
Wireless Mode — Select the wireless mode to limit the type of wireless devices that can connect to the network. Options are: • • • • 802.11b only: Only 802.11b wireless devices can connect to the network. 802.11g + 802.11b: Only 802.11g and 802.11b wireless devices can connect to the network. 802.11g only: Only 802.11g wireless devices can connect to the network. 802.11n + 802.11g + 802.11b: All 802.11n, 802.11g, and 802.11b wireless devices can connect to the network.
Shared Key — Requires users to enter the same WEP key to exchange data with other wireless devices. Encryption Strength — Select 64bit to enter or generate a 10-character key or select 128bit to enter or generate a 26-character key. • Key Format — Select HEX to generate hexadecimal characters only or ASCII to generate ASCII characters. Passphrase — Enter a passphrase, then click the Generate button to automatically generate WEP keys.
Group Rekey Time — Enter the number of seconds to elapse until the Modem Router prompts for the key again. Click the Apply button to save your changes or click the Cancel button to discard your changes. WPA2 (AES) Select WPA (Wi-Fi Protected Access) using AES (Advanced Encryption Standard) for better encryption. Authentication Type — Select an authentication type. Options are: • PSK: Select to use a passphrase for authentication. If you select PSK, enter a passphrase in the Confirmed Passphrase field.
Authentication Type — Select an authentication type. Options are: • PSK: Select to use a passphrase for authentication. If you select PSK, enter a passphrase in the Confirmed Passphrase field. • EAP: Select to use Extensible Authentication Protocol (EAP). This should only be used when a Radius server is connected to your Modem Router. If you select EAP, enter the following information: • • • Radius Server IP: The IP address of the authentication server.
DNS Relay — Select whether to enable or disable the DNS relay function. Check this box to request automatic assignment of a DNS, then enter the Primary DNS Server and the Secondary DNS Server in the DHCP Setting screen below. DHCP Setting This section allows you to configure your Modem Router to use the Dynamic Host Configuration Protocol (DHCP). You can set your Modem Router as a DHCP server or a DHCP relay agent of your network.
IP Pool Starting Address — Enter the lowest range of IP address to assign. The default value is 192.168.10.101. IP Pool Ending Address — Enter the highest range of IP address to assign. The default value is 192.168.10.200. Subnet Mask — Enter the subnet mask. The default value is 255.255.255.0. IPRouters — Enter the IP address of your Modem Router. The default value is 192.168.10.1. Primary DNS Server and Secondary DNS Server — Enter a primary and a secondary DNS server if the DNS Relay option is enabled.
Click the Apply button to save your changes or click the Cancel button to discard your changes. DHCP Reserved Address This section lists the DHCP reserved addresses on your network. If your Modem Router is set as the DHCP server, your Modem Router can reserve a particular IP address to a specific device. To reserve an IP address, click the Add button. Enable — Check this box to enable this function. Host Name — Enter a host name for the DHCP reserved address. IP Address — Enter the IP address to reserve.
Time and Date The Time and Date page allows you to manually configure the time and date of your network or to synchronize with a Network Time Protocol (NTP) server. To access the Time and Date page, click SETUP > Time and Date. Time Zone — Select the time zone in your location. To set the network time and date according to the selected time zone, click the Sync Time button. NTP (Network Time Protocol) — Check the Enable box to synchronize the network time and date with an NTP server.
To manually set the time and date of your network, select the Year, Month, Day, Hour, Minute, and Second from their corresponding drop-down lists. Click the Set Time button to apply the changes. Advanced The Advanced menu configurations greatly affect the operating performance of your Modem Router. This menu is intended for advance users. It is recommended to retain the default settings if you are unsure about them.
Fragment Threshold — Fragment threshold refers to the maximum size of a packet before data is fragmented into multiple packets. The default and recommended value is 2346 bytes. If you experience a high packet error rate, you may slightly adjust the value. Setting the fragment threshold too low may result in poor network performance. RTS Threshold — The default and recommended value is 2347. Should you encounter inconsistent data flow, only slight modifications should be made.
Name (SSID) — Select the SSID from the drop-down list. To Set MAC Filter Do the following to deny or allow a device to access to the wireless network. 9. Select the MAC Restrict Mode. Options are: • • • Disable: No restriction. Deny: To deny access to the wireless network. Allow: To allow access to the wireless network. 10.On the MAC Address field, enter the MAC address of the device that you want to deny or allow access. 11.Click the Add button to add the MAC address to the MAC ADDRESS LIST. 12.
Click Advanced > Advanced Wireless > WPS Setting or click the WPS Setting button. Basic Setting Enable WPS — Check this box to enable the WPS function. Device Password (PIN) — Displays the PIN password. To generate a new PIN, click the Generate New PIN button. To reset the PIN to default, click the Reset PIN to Default button. Click the Apply button to save your changes or click the Cancel button to discard your changes.
Multi-WAN DSL Auto Scan This page allows you to scan your DSL line for available VPI/VCI. To access the DSL Auto Scan page, click Advanced > Multi-WAN > DSL Auto Scan or click the DSL Auto Scan button. VPI/VCI Scanning Click the Scan button to start scanning your DSL line for available VPI/VCI. Scanning may take several minutes. Click the Cancel button to stop scanning. Current Auto-PVC Table Displays the current PVCs. Your Modem Router supports up to 8 PVCs. To modify an entry, do the following: 15.
IP/PPP Config This page allows you to create multiple Wide Are Networks (WAN) and manually add an IP or a PPP connection. To access the IP/PPP Config page, click Advanced > Multi-WAN > IP/PPP Config or click the WAN Config button. To add an IP or PPP connection, do the following: 18.Click the Add button of the connection that you want to add. 19.On the Interface field, select the PVC. 20.Enter the connection settings.
Advanced-LAN This page allows you to add multiple LAN IP addresses. To access the Advanced-LAN page, click Advanced > Advanced-LAN. Config Spanning Tree Spanning Tree Enable — Check this box to enable spanning tree. Click the Apply button to save your changes or click the Cancel button to discard your changes. Add IP Interface To add an IP interface, do the following: 22.On the first record on the table, enter the IP Address and Subnet Mask. 23.Check the Enable box to enable the IP interface. 24.
Check a corresponding box to select the option. To reset the ADSL settings, click the Reset button. Click the Apply button to save your changes or click the Cancel button to discard your changes. RIP Settings A Routing Information Protocol (RIP) is an Internet protocol that is used to share routing information table with other routing devices on the local and wide area network. To access the RIP Settings page, click Advanced > RIP Settings. To add RIP settings, do the following: 25.Select the Interface.
NAT Virtual Server A virtual server allows remote devices accessing the Web or FTP services via a public IP address be redirected to local servers in the LAN. Depending on the requested service (TCP/UDP port number), your Modem Router redirects the external service request to the appropriate server in the LAN. To access the Virtual Server page, click Advanced > NAT > Virtual Server or click the Virtual Server button. The table displays the virtual servers on your network.
Time Schedule — Select a schedule when to use the virtual server or click the New Time Schedule button to create a new schedule. Click the Apply button to save your changes or click the Cancel button to discard your changes. Port Trigger This page displays the port trigger settings on your network. Port triggering is a type of port forwarding where outgoing data from specific ports are sent to specific incoming ports.
Click the Apply button to save your changes or click the Cancel button to discard your changes. ALG Application Layer Gateway (ALG) consists of a security component that augments NAT or a firewall. Your Modem Router allows NATs to support address and port translation for certain application layer protocols such as FTP, SNMP, and others. To access the ALG page, click Advanced > NAT > ALG or click the ALG Setting button.
Click the Apply button to save your changes or click the Cancel button to discard your changes. VPN Passthrough This page allows you to control VPN tunnels using IPSEC, PPTP, and L2TP protocols to pass through your Modem Router. To access the VPN Passthrough page, click Advanced > NAT > VPN Passthrough or click the VPN Setting button. IPSEC Passthrough — Internet Protocol Security (IPSec) is a protocol suite used to secure IP communications by authenticating and encrypting IP packets.
Firewall MAC Filter This page allows you to set up a list of MAC addresses which will be allowed or restricted to access the Internet. To access the MAC Filter page, click ADVANCED > Firewall > MAC Filter or click the MAC Filter button. MAC Address Control — Check this box to enable the MAC filter function. Control Action — Select Allow to allow a specified MAC address to access the Internet or Deny to restrict a specified MAC address access to the Internet.
The table lists the existing filter rules. To edit an entry, click the corresponding icon. To delete an entry, click the corresponding button. To add a filter, click the Add button. The IP Filter Config screen is displayed. IP Filter — Check this box to enable IP filtering. Filter Name — Enter a filter rule name. Start Source IP Address — Enter the starting point of the source IP address. End Source IP Address — Enter the ending point of the source IP address. Source Port — Enter the source port number.
URL Filter This page allows you to deny network devices to access specific URLs or URLs that contain specific keywords. To access the URL Filter page, click ADVANCED > Firewall > URL Filter or click the URL Filter button. URL Filter — Check this box to enable URL filtering. Show Redirect Page — Check this box to redirect devices to another website when the website they are trying to access is blocked. Click the Apply button to save and activate the filter or click the Cancel button to discard your changes.
32.Select the time to implement the URL filter or click the New Time Schedule button to create a new schedule. 33.Click the Add button of the Add Keyword Rule. The entry is listed on the URL LIST table. To delete an entry, click the corresponding button. DOS Protection This page allows you to protect your network from hackers to run Denial of Service (DoS) attacks. To access the DOS Protection page, click ADVANCED > Firewall > DOS Protection or click the DOS Protection button.
Dos Protection Option — Check the appropriate boxes to enable protection from SYN flood, FIN flood, UDP flood, ICMP flood, SMURF, IP spoofing, and others. Enter the flood count numbers or retain the default values if you are unsure about them. Check the Apply button to save and activate DoS protection or click the Cancel button to discard your changes. Domain Blocking This page allows you to deny network devices to access specific domains such as an http and an ftp.
DMZ — Check this box to enable DMZ. DSL Interface — Select the DSL interface to activate DMZ from the drop-down list. DMZ Host IP Address — Enter the IP address of the computer to set as the DMZ host. Check the Apply button to save and activate DMZ. SPI Settings SPI (Stateful Packet Inspection) filters more kinds of attacks by closely examining packet data structures. To access the SPI Settings page, click ADVANCED > Firewall > SPI Settings or click the SPI Settings button.
Packet Filter Filters & Rules This page allows you to create packet filters and rules. These filters are used to check each data that passes within your network. If the packet data does not meet the requirements, the packet is either dropped or rejected. To access the Filters & Rules page, click ADVANCED > Packet Filter > Filters & Rules or click the Filters & Rules button. Filters Click the Add button to create a new filter. Name — Enter desired filter name.
Rules After creating filters, click the Add button to set the rules on how to implement the filters. Filter Key — Select the filter to assign the rule. Enable — Check this box to enable this rule. Protocol — Select a protocol from the drop-down list. Options are TCP, UDP, or ICMP. Action — Select the action to execute when the rule requirement is met. Options are: • • • Drop: Select to drop the packets if the rule requirement is met.
Destination Start Port and Destination End Port — Enter the starting and ending port range of the destination of the packets. ICMP Type — Select an ICMP type from the drop-down list. If the selected type is met, the filter is implemented. Click the Apply button to save and activate the rule or click the Cancel button to discard your changes. Statistics This page displays the filter and rule statistics.
Gateway — Enter the gateway. Interface name — Select the interface to implement the routing. Click the Apply button to save and activate the static route or click the button to discard your changes. Multicast Internet Group Management Protocol (IGMP) manages members of groups of devices, called IP multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish multicast group membership. It is an integral part of the IP multicast specification, like ICMP for unicast connections.
IGMP Proxy IGMP proxy enables your Modem Router to forward multicasts traffics between LAN and WAN networks. Select IGMP Proxy Version and DSL Interface. Enter values for IGMP Query Interval, Robust Count, IGMP Last Member Query Interval, IGMP Robustness, Query Response Interval, and Group Live Delay Time. If you are unsure about them, leave the default values. IGMP Snooping With IGMP snooping, your Modem Router can make intelligent multicast forwarding to connections that have group members attached.
Connection Name — Select a connection from the drop-down list. Use Dynamic DNS Service — Check this box to register this account to the DNS server. Service Provider — Select a service provider from the drop-down list. NOTE: Additional charges may be incurred depending on the selected service provider. Host Name — Enter a domain name to be registered to the DNS server. User Name — Enter the user name of your DNS account assigned by the service provider.
Check the Enable box of the LAN interface to enable the port. Select the LinkMode from the drop-down list. Options are: Auto, 10Half, 10Full, 100Half, and 100Full. Check the FlowCntrl box of the LAN interface to enable flow control. Click the Apply button to save your changes. Port Mapping Port mapping allows you to group interfaces for traffic control. Traffic is isolated from group to group. Therefore, traffic coming from an interface of a group can only be flowed to the interfaces in the same group.
Port Mapping — Check this box to enable port mapping. To Create New Groups 37.Click the New button. An empty group appears on the table. 38.Click the radio button to select the empty group. 39.Add members to the group. To do so, select an interface from the Available Interfaces panel. Then click the <- button to add the selected interface to the Grouped Interfaces panel. 40.Repeat step 3 to add more members to the group. 41.Click the Apply button to save your changes. To Modify Groups 42.
Quality of Service (QoS) Quality of Service (QoS) is a network standard that assigns the priorities of traffic that passes through your Modem Router. This ensures that demanding real-time applications, such as video streaming, are given priority over other data. Queue Management This page allows you to enable QoS and choose Differentiated Services Code Point (DSCP) markings to automatically mark incoming traffic without reference to a particular classifier.
The table displays QoS queue configurations. To edit an entry, click the corresponding icon. To delete an entry, click the corresponding icon. To configure QoS queue entries, click the Add button. Name — Enter a QoS queue entry name. Enable — Check this box to enable this queue. Interface — Select the interface to implement this QoS queue. Policy — Select the queue policy. Options are: • • SP: In Strict Priority (SP), packets with a high priority are processed first.
the specified conditions in the classification rule must be satisfied for the rule to take effect. To access the Queue Classification page, click ADVANCED > Quality of Service > Queue Classification or click the QoS Classification button. The table displays QoS queue classification rules. To edit an entry, click the corresponding icon. To delete an entry, click the corresponding icon. Class Name — Enter a class name. Class Enable — Check this box to enable the class.
You can classify traffic based on ingress interface, Ether type, packet length, source or destination MAC address/ MAC Mask, or a combination of them. Select an option or enter the values on the fields that you want to use for the criteria. Otherwise, leave the fields empty. Depending on the selected Ether Type, the succeeding required information may vary. If packet length is used as a criteria, select the Packet Length Rule from the dropdown list and enter the Packet Length.
To access the UPnP page, click ADVANCED > UPnP. UPnP — Check this box to enable the UPnP feature. UPnP LOG — Check this box to log UPnP status. TR064 — Check this box to enable TR064. UPnP WAN Interface — Select the interface to implement UPnP. Click the Apply button to save and apply the settings. SNMP Simplified Network Management Protocol (SNMP) is a troubleshooting and management protocol that is used to monitor the status and change the configurations of your Modem Router locally or remotely.
System Contact — Enter the contact person or contact information for your Modem Router. System Name — Enter an assigned name for your Modem Router. System Location — Enter an assigned location for your Modem Router. Public Community and Private Community — Enter a public and private community name. Trap — Check this box to enable the Trap function, then provide the following information: • • Trap Version: Select an SNMP trap version from the drop-down list.
Click the Apply button to save your changes or click the Cancel button to discard your changes. Remote Management This page allows you to enable remote devices to manage your Modem Router using the Hypertext Transfer Protocol (HTTP), Command-Line Interface (CLI), and File Transfer Protocol Daemon (FTPD). To access the Remote Management page, click MAINTENANCE > Remote Management.
Click the Apply button to save your changes or click the Cancel button to discard your changes. FTPD Management Check the FTPD Enable box to allow network administrators to upgrade the firmware or restore configurations using the FTP. Keep old session — Check to retain the old session. Click the Apply button to save your changes or click the Cancel button to discard your changes. Remote Access This page allows you to create and edit remote access rules.
Wan Interface — Select the interface from the drop-down list. Status — Select whether to enable or disable remote access of the device. Remote IP — Enter the IP address of the remote device. Remote IP Mask — Enter the IP mask of the remote device. NOTE: To allow or deny all devices to remotely access your Modem Router, enter “*” on the Remote IP and Remote IP Mask fields. Service — Select the type of remote management service that the device can or cannot access.
TR069 Settings Enable — Check this box to enable TR069. Use Interface — Select the interface to implement TR069. ACS URL Address — Enter the URL of the Auto-Configuration Server (ACS) ACS User Name — Enter the user name of your Modem Router when connecting to the ACS. ACS Password — Enter the password that your Modem Router should use when connecting to the ACS. Re-enter the password on the Confirm Password field. Connection Request Port —Enter the port that issues the request.
Periodic Inform — When enabled, your Modem Router will send remote procedure calls (RPC) to the ACS server at system startup and will continue sending RPCs periodically. When disabled, your Modem Router will send RPCs to the ACS server at system startup only. Periodic Inform Interval — Enter the interval time of sending RPCs. TR069 CA IMPORT To import certificates, do the following: 45.Click the Browse button. 46.Browse for the certificate, then click the Open button. 47.The file is displayed on the field.
48.Click the Browse button. 49.Browse for the file, then click the Open button. 50.Click the Import Script button. To show the scripts on your computer, click the Show Start/End Script button. To delete the scripts on your computer, click the Delete button. SysLog This page allows you to enable and configure system logs such as device status, events, and activities. Logs can be sent to the network administrator via e-mail. To access the SysLog page, click MAINTENANCE > SysLog.
51.Select Module and Facility. 52.Select Severity level. emerg is the highest level while debug is the lowest level. 53.Select Location: Remote Server or Mail. 54.The succeeding fields may vary depending on the selected location. Enter the necessary information accordingly. 55.Click the Apply button to save your changes or click the Cancel button to discard your changes. E-mail Log Periodically To log e-mails periodically, do the following: 56.
60.Click the Apply button to save your changes or click the Cancel button to discard your changes. Time Schedule This page allows you create desired time schedule. To access the Time Schedule page, click MAINTENANCE > Time Schedule. To create a new schedule, do the following: 61.On the Name field, enter desired schedule name. 62.Check the days to implement the schedule and select the time period. 63.Click the Add button to save the schedule. The new entry is listed on the TIME SCHEDULE LIST.
Click the Browse button and browse for the file. Click the Apply button to start firmware upgrade. NOTE: Do not turn off or press the Reset button on your Modem Router while firmware upgrade is in progress. This may cause the system to crash. Configuration Backup/Restore This page allows you to save a backup of your current settings, revert settings to a backup point, or restore the default factory settings.
69.A warning message appears, click the OK button to continue. NOTE: Restoring to factory defaults may take some time. Do not turn off your Modem Router. Ping Once you have configured your Modem Router, it is recommended to ping the network devices to verify their connection. When you execute a ping test, a series of packets are sent to a specific computer. When the computer receives the packets, it will respond with an acknowledgment that it received the packets.
Diagnostics This page allows you to test the connectivity of the physical and protocol layers on the WAN side. To access the Diagnostics page, click MAINTENANCE > Diagnostics. To start the test, select the DSL Interface from the drop-down list, and then click the Test button. Reboot Device In the event that your device does not respond correctly or stops responding, reset your device. All your settings will be retained. 70.Click the Reset button. 71.Click OK to confirm. 72.When prompted, click OK.
Status The Status menu provides the current status and settings of your Modem Router. Summary This page displays the summary of the system, DSL link, ATM PVC, Internet connection, LAN, and wireless ports status. To access the Summary page, click STATUS > Summary. ADSL Info This page displays the status of your DSL line. To access the ADSL Info page, click STATUS > ADSL Info. Click the Refresh button to refresh the information.
Click the Refresh button to refresh the information.LAN Clients This page displays the clients connected on your network. To access the LAN Clients page, click STATUS > LAN Clients. Click the Refresh button to refresh the information. Logs This page allows you to view, clear, and backup system logs. To access the Logs page, click STATUS > Logs. You can filter the list by selecting a particular Facility, Severity, Module, or History from the drop-down lists.
Click the Clear History button to delete old logs. Click the Backup Logs button to save a backup of the logs. Click the |< << >> >| buttons to scroll through the logs. Click the Refresh button to refresh the information. Routing Table This page displays the destination routes commonly accessed by your network. To access the Routing Table page, click STATUS > Routing Tables. Click the Refresh button to refresh the information.
Traffic Data Interface The table lists the available interfaces on your network. Check the State box of the interface to view its traffic. You may check more than one interface. Traffic Bandwidth Interval Interval — Enter the interval of refreshing the traffic bandwidth. Traffic Bandwidth Meter This table lists the current traffic. Driver Version This page displays the current kernel, Wi-Fi, and DSL driver versions. To access the Driver Version page, click STATUS > Driver Version.
Statistics > DSL Statistics This page displays the transmission and reception statistics of the DSL line. To access the DSL Statistics page, click STATUS > Statistics > DSL Statistics or click the DSL Statistics button. Click the Refresh button to refresh the information.
Appendix Regulatory & Safety Information Wireless LAN, Health and Authorization Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations.
FCC (Federal Communications Commission) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
PART 68 statement This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment is a label that contains, among other information, a product identifier in the format US: TI1DL02BTEW658BRM . If requested, this number must be provided to the telephone company. The REN for this product is part of the product identifier that has the format US: TI1DL02BTEW658BRM . The digits represented by 01 are the REN without a decimal point.
Česky [Czech] TRENDnet tímto prohlašuje, že tento TEW-658BRM je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW-658BRM overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, TRENDnet , jiddikjara li dan TEW-658BRM jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, TRENDnet nyilatkozom, hogy a TEW-658BRM megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Specifications Hardware Standards IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Complies with ADSL standards - ANSI T1.413 Issue2 RJ-11 Port (ADSL line Interface) - G.992.1 (G.dmt, Annex A) - G.992.2 (G.lite) Complies with ADSL2 standard - G.992.3 (G.dmt.bis) Complies with ADSL2+ standard - G.992.
Consumption Dimension (L x W x 201 x 116 x 31 mm (8 x 4.6 x 1.2 in.) H) Weight Temperature 301 g (10.6oz) Operation: 0° ~ 40°C (32°F ~ 104°F) Storage: -10° ~ 70°C (14°F ~ 158°F) Humidity Max. 95% (non-condensing) Certifications CE, FCC Wireless Frequency 2.415 ~2.484GHz band Modulation DBPSK/DQPSK/CCK/OFDM (BPSK/QPSK/16-QAM/64-QAM) Antenna 2 x 2dBi fixed dipole antennas 802.11b: up to 11Mbps Data Rate 802.11g: up to 54Mbps 802.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-658BRM – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
