Ÿ N300 Outdoor PoE Access Point TEW-739APBO Ÿ Quick Installation Guide (1) TEW-739APBO (V1) /01.16.
1. Before You Start Package Contents Ÿ TEW-739APBO Ÿ CD-ROM (User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ Proprietary PoE injector Ÿ Power adapter (48 V DC, 0.
2. Hardware Configuration Note: The default IP address of the TEW-739APBO is 192.168.10.100. To configure the TEW-739APBO, your network adapter must have an IP address within the 192.168.10.x subnet (e.g. 192.168.10.50). Please refer to the Appendix in the User's Guide for more information. Phase 1: Access Point Setup Note: Ÿ The initial configuration should be completed in a testing environment. Configure the device before mounting.
1. Connect the TEW-AO46S or the TEW-AO57 antennas to the TEW-739APBO. 2. Connect one end of a network cable into the TEW-739APBO. 3. Connect the other end of the network cable to the P+DATA OUT port on the Power over Ethernet Injector. 4. Connect one end of another network cable to the 10/100 DATA IN port on the Power over Ethernet Injector. 5. Connect the other end of a network cable to your computer's Ethernet port. 6. Connect the power adapter into the Power over Ethernet Injector.
9. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin Note: Username and password are case sensitive. Note: For first time installation, you are required to change the admin password. 10. Enter a new admin password. 11. Confirm the new password. 12. Click Save. 13. Please wait while the access point reboots. 14. Click Wireless " Virtual AP. 15. Click Edit.
Note: To protect your network from any unauthorized access it is recommended to enable wireless encryption. 16. Select WPA2-PSK for security type. 17. Select AES for cipher suite. 18. Enter a Pre-shared Key (wireless password). 19. Click Save.
20. Click Reboot. 21. Click Reboot. 22. Wait 45 seconds while the Access Point reboots. 23. Configure the TEW-739APBO's IP address to a valid IP address within the subnet defined by the Router. Avoid using an IP address within the DHCP pool of your router. In this example, we will assume the following: Router IP Address: 192.168.10.1 Subnet Mask: 255.255.255.0 DHCP Pool: 192.168.10.100~192.168.10.149 The TEW-739APBO will be setup with the following IP address assignment: IP Address: 192.168.10.
24. Click System " LAN. 25. Select Static IP. 26. Configure the IP Address, IP Netmask and IP Gateway based on the example in step 23. 27. Select Specify DNS Server IP. 28. Configure the Primary DNS based on the example in step 23. 29. Click Save. 25 24 24 26 27 28 29 30. Click Reboot.
31. Click Reboot. 32. Wait 45 seconds while the Access Point reboots.
3. Hardware Installation Waterproof kit installation 1. Unscrew the sealing nut from the main body. 7. Insert the seal/rubber claw into the Cable Gland. 2. Separate the rubber seal from the claw. 3. Verify that you have the following parts: Cable Gland, Seal, Claw, Sealing Nut Cable Gland Seal Claw Sealing Nut 4. Insert one end of an Ethernet cable into the sealing nut. 8. Connect the Ethernet cable to the PoE port on the rear of the access point. 5. Insert the Ethernet cable into the seal. 9.
Access point installation TEW-739APBO Internet Modem Router Building 10
1. Refer to the above diagram. 2. Mount the TEW-739APBOs in your desired location. Instructions for pole mounting the access point can be found in the section. 3. Verify that the status LED indicators on both TEW-739APBOs are fully functional: PWR [Power](Green / Solid), LAN (Blinking / Green), Wireless Signal Strength (Blinking / Green). LAN Power Wireless Signal Strength Connecting the Grounding Wire 1. Identify the grounding hole on the outdoor access point. You will see a symbol next to the hole. 2.
Pole mounting the TEW-739APBO Note: The pole mounting clamp supports poles with a maximum diameter of 78 mm (3.07 inches). 1. Align the mounting bracket with the holes on the the unit and secure it with the screws and washers provided. 2. Slide the two provided pole mounting clamps around the pole. Place the mounting bracket at the desire height and position. Secure the TEW-739APBO to the pole mounting.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Product Information: Model Number: TEW-739APBO N300 Outdoor PoE Access Point Product Name: TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EMC EN 60950-1: 2006 + A11: 2009: +A1: 2010 + A12: 2011 EN 301 489-1 V1.9.2: 09-2011 EN 301 489-17 V2.2.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.
Información general sobre la GPL/LGPL Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la Licencia pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son distribuidos SIN GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece servicio técnico para estos códigos.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following length of time from the date of purchase. Warranty: 3 year limited warranty (When Applicable: 1 year warranty for power adapter, power supply, and cooling fan components.) Visit TRENDnet.com to review the full warranty policy, rights, and restrictions for this product.
TEW-739APBO Гарантія компанії Гарантія компанії TRENDnet поширюється на дефекти, що виникли з вини виробника, при дотриманні умов експлуатації та обслуговування протягом встановленого періоду з моменту придбання.
