User's Guide

© Copyright 2014TRENDnet. All Rights Reserved.
19
TRENDnet User’s Guide
TEW-739APBO
Create Virtual AP (VAP)
The TEW-739APBO support broadcasting multiple SSIDs, allowing the creation of Virtual
Access Points, partitioning a single physical access point into 7 logical access points, each
of which can have a different set of security, VLAN Tag(ID) and network settings. Figure
3-2 shows multiple SSIDs with different security type and VLAN settings.
Multiple SSIDs with different Security Type and VLAN Tag
Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears.
• VAP: Indicate the system's Virtual AP.
• MAC Address: The MAC address of the VAP Interface is displayed here. When you
enable AP and reboot system, the MAC address will display here.
• ESSID: Indicate the ESSID of the respective Virtual AP
• Status: Indicate the Status of the respective Virtual AP. The Primary AP always on.
• Security Type: Indicate a used security type of the respective Virtual AP.
• MAC Filter: Indicate a used MAC filter of the respective Virtual AP.
• Edit: Click Edit button to configure Virtual AP's settings, including security type and
MAC Filter.
SSID 3
VLA
N #5
VLA
N #4
VLA
N #3
VLA
N #2
VLA
N #1
SSID 5
SSID 4
SSID 2
SSID 1
Sales Network
Engineer Network
Market Network
Guest Network
Accounting Network
WPA2-
PSK/AES
WPA2-
PSK/TKIP
WPA-
PSK/AES
WPA-
PSK/TKIP
W
E