User's Guide

© Copyright 2014TRENDnet. All Rights Reserved.
24
TRENDnet User’s Guide
TEW-739APBO
• Wireless Information: Display total received and transmitted statistics on available
Virtual AP.
o WiFi: Wireless status of the access point.
o Band: Operating wireless band of the access point.
o Channel: Operating channel of the access point.
o Current Tx Power: Transmit power of the access point.
o Data Rate: Current wireless data rate of the access point.
Associated Clients Status
It displays ESSID, on/off Status, Security Type, and total number of wireless clients
associated with all Virtual AP.
• VAP Information: Highlights key VAP information.
o VAP: Available VAP from Primary AP to VAP6.
o ESSID: Display name of ESSID for each VAP.
o Status : On/Off
o Security Type: Display chosen security type; WEP, WPA/WPA2-PSK, WPA/WPA2-
Enterprise.
o Clients: Display total number of wireless connections for each VAP.
• VAP Clients: Display all associated clients on each Virtual AP.
o MAC Address: MAC address of associated clients
o RSSI: Signal Strength of from associated clients.
o TX/RX Rate: Transmit and receive connection rate
o TX/RX SEQ: Transmit and receive sequence.
o TX/RX Bytes: Transmit and receive bytes
o Connect Time: Connection time
o Disconnect: Click “Disconnect” button to manually disconnect a wireless client in
a Virtual AP.
Show WDS Link Status
Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel
bandwidth for each WDS are available.
o MAC Address: Display MAC address of WDS peer.
o RSSI: Indicate the signal strength of the respective WDS links.
o TX/RX SEQ: Transmit and receive sequence.
o TX/RX Bytes: Transmit and receive bytes