User's Guide

© Copyright 2014TRENDnet. All Rights Reserved.
41
TRENDnet User’s Guide
TEW-739APBO
• Channel: Channel numbers used by all found Access Points.
• Security: Security type by all found Access Points.
• Band: Wireless band used by all found Access Points.
• Network Type: Network type used by all found Access Points.
• Select: Click “Select” to configure settings and associate with chosen AP.
Repeater AP Setup
The administrator can configure station profiles via this page.
Please click on Wireless -> Wireless Profile and follow the below setting.
• ESSID: Assign Service Set ID for the wireless system.
• Enable Repeater SSID: Select Enable to broadcast the repeated signal.
• Hidden SSID: Select Enable to broadcast the access point’s SSID.
• Client Isolation: Select Enable to isolate wireless clients from each other.
• IAPP:
• Maximum Clients: Enter the amount of wireless clients allowed to connect to the
access point.
• Security Type: Select the desired security type from the drop-down list; the options
are Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and
WEP 802.1X.
o Disable: Data are unencrypted during transmission when this option is selected.
• WEP Auth Method: Enable the desire option among OPEN or SHARED
o Key Index: Key index is used to designate the WEP key during data transmission. 4
different WEP keys can be entered at the same time, but only one is chosen.
o WEP Key #: Enter HEX or ASCII format WEP key value; the system supports up to 4
sets of WEP keys.
• WPA-PSK (or WPA2-PSK): WPA (or WPA2) Algorithms, allows the system accessing
the network by using the WPA-PSK protected access.
o Cipher Suite: By default, it is AES. Select either AES or TKIP cipher suites
o Group Key Update Period: By default, it is 600 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.
o Master Key Update Period: By default, it is 83499 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.